Supervisor level
Service interval
The tumble dryer shows a custom message at a selected interval to prompt you to
undertake specific maintenance tasks.
3 different messages can be created: 1/2/3. Each message is created in the language and
alphabet of the current supervisor language.
Your message is displayed at the end of the programme and can be acknowledged with
OK
. The same message appears at the end of the next programme.
Settings
This setting allows you to determine the interval (by hours or date) at which the message
appears.
- Factory setting: Off
- by time
You can select a time interval between 1-9999 hours.
- by date
You can enter a date.
Message text
Enter your individual message text for your planned maintenance work. You can edit one,
two, or all three of the 1/2/3 messages.
Reset display
The message will appear until the display is permanently reset. The message then only
appears again when the next interval is reached.
External applications
External exhaust flap
External hardware is connected via the Miele XCI box.
The time delay between the external exhaust air flap's activation point and the switch-on
time for the drum/fan motor is regulated.
A message appears in the display while the exhaust air flap is open.
- Factory setting: Off
This option must always be selected if there is no exhaust air flap to activate. This
prevents the programme from being cancelled.
- On
- 0 seconds
- 1 second
- 2 seconds
...
- 300 seconds
48