Optional Accessories; Xci Box; Xkm 3200; Data Protection And Data Security - Miele PDR 914 Operating And Installation Instructions


Only use genuine Miele spare parts and accessories with this machine. Using spare
parts or accessories from other manufacturers will invalidate the warranty, and Miele
cannot accept liability.
XCI box
The optional XCI box allows external hardware from Miele and other suppliers to be
connected to the Miele Professional machine. External hardware includes, e.g. payment
system, peak-load system, pressure sensor or an external vent flap.
The XCI box is supplied with supply voltage by the Miele Professional machine.
XKM 3200
The optional Miele Communication Module can be used to establish a data connection
between a Miele Professional machine and a data processor in accordance with the
Ethernet or Wi-Fi standard.
The communication module is intended exclusively for commercial use and is supplied
with mains voltage directly via the Miele Professional machine. No additional power
connection is required. The Ethernet interface provided via the communication module
complies with SELV (safety extra low voltage) requirements in accordance with EN 60950.
Connected external machines must also comply with SELV.

Data protection and data security

When you activate the networking function and connect your machine to the Internet, your
machine sends the following data to the Miele Cloud:
- Machine serial number
- Machine model and technical features
- Machine status
- Information about the software status of your machine
Initially, this data cannot be assigned to a specific user and is not saved permanently. Data
cannot be saved permanently or assigned to a specific user until after you have linked your
machine to a user. Data transmission and processing are governed by Miele's strict
security standards.

Factory default settings for network configuration

You can reset all of the settings on the communication module or your integrated Wi-Fi
module to the factory default settings. The network configuration should be reset
whenever a machine is being disposed of or sold, or if a used machine is being put into
operation. This is the only way to ensure that all personal data has been removed and, in
the case of the latter, the previous owner will no longer be able to access the machine.

Copyright and licences

For the purpose of operating and controlling the communication module, Miele uses
proprietary or third-party software that is not covered by open source licensing terms.
These items of software/software components are protected by copyright. The copyright
powers of Miele and third parties must be respected.

Optional accessories

37