Programme Packages; Favourite Programmes; Special Programmes - Miele PDR 914 Operating And Installation Instructions

Supervisor level
* The maximum running time is specified during initial commissioning.
- Launderette Logo int. time
4 timed programmes* with different temperature levels are time-controlled via the tumble
dryer electronics.
The set value indicates the maximum running time and can be modified by the user.
* The maximum running time is specified during initial commissioning.
External prog. selection
-
A communication module can be used to select the programme from an external
terminal.

Programme packages

This allows you to specify the scope of the tumble dryer programme. You can select all of
the programmes or individual programmes from the relevant programme packages.
The tumble dryer's additional scope of programmes can be configured. The programmes
are listed in the "Programme chart".

Favourite programmes

After switching on, you can also select a programme via:  Favourites.
12 programmes can be stored as favourite programmes based on your own priorities and
requirements.
These favourite programmes will also be made available in the control options
- Laundrette ext. (12 prog.)
- Laundrette basic (4 prog.) (the first 4 of the 12 favourites).
You can specify the control options under
Useful tip: You can assign a different colour to each programme. In this case, the Prog.
colour allocation setting must be set to On.
Changing favourite programmes
Select the programme you wish to change or replace.

Confirm the programme or the setting to be changed.

Another menu opens, enabling you to select a new programme or change the parameters.
Confirm with the

Your selection is now active.

Special programmes

You can put together 5 special residual moisture or time-controlled programs and assign
your own program names.
First, enter the programme name.
Select the special programme you want to change.

The Save as menu opens.
Use the letters and symbols below the line to enter the name.

44
Save sensor.
Controls
.