Save
Touch the
sensor.
You can now enter the parameters for a Res. moisture programme or Timed drying.
The 5 special programmes are pre-programmed at the factory. You can change these
special programmes.
The special programmes are added to the programme packages. Enter the names and
settings of your special programmes into the "Special programmes" table at the end of
the "Programme chart".
Res. moisture programme
Final residual moisture
-
-6% (dry) – 40% (damp)
Extra drying time
-
:
0 – 60 minutes
Temperature
-
(process air):
cold – 75 °C
-
Cooling down temperature
40 – 55 °C
Anti-crease
-
Drum rotation main direction
–
0 – 500 seconds
Pause
–
:
100 – 300 seconds
–
Drum reversal
0 – 500 seconds
Timed drying
:
Running time
-
:
1 – 120 minutes
Temperature
-
(process air):
cold – 75 °C
-
Cooling down temperature
40 – 55 °C
Anti-crease
-
–
Drum rotation main direction
0 – 500 seconds
Drum reversal
–
0 – 500 seconds
–
Pause
:
100 – 300 seconds
Sort programmes
Programmes can be moved within the programme list and in the Favourites list.
- Factory setting: Off
:
:
(process air):
:
:
(process air):
:
:
Supervisor level
45