Availability Of Miele Digital Products; Wifi / Lan; Network Time - Miele PDR 914 SOM Operating And Installation Instructions

en - Supervisor level
- Internal module (factory default)
The internal WiFi module is used.
- External module
An XKM module or RS232 module is inserted into the module slot.

Availability of Miele digital products

The ability of Miele digital products depends on the availability of the services in your
country.
The different services are not available in all countries.
For information about availability, please visit www.miele.com.

WiFi / LAN

Control the networking of your tumble dryer.
- Setup
This message only appears if the tumble dryer has not yet been connected to a WiFi net-
work.
- Deactivate (visible when the network is activated)
The network remains set up; the WiFi function is switched off.
- Activate (visible when the network is deactivated)
The WiFi function is reactivated.
- Connection status (visible when the network is activated)
The following values are displayed:
– The quality of WiFi reception
– The network name
– The IP address
- Reset (visible when set up)
Resets the WiFi login (network) to immediately re-establish a new connection.
- Reset (visible if already set up)
The network is no longer set up. A new connection has to be established in order to use
the network again.
– The WiFi is switched off
– The WiFi connection will be reset to the factory default setting

Network time

The date and time can be synchronised over the network.
- Off
The date and time are not synchronised over the network.
- As master
The machines are in a network but are not connected to the Internet. A machine is de-
clared as the master and sends data to the slave devices.
- As slave
110