Anchoring; Electrical Connection - Miele PDR 914 Operating And Installation Instructions

Installation
34
After the machine has been aligned, screw the nuts on the

adjustable feet tightly to the base plate using an open spanner.

Anchoring

The tumble dryer must be secured to the floor by fitting the

tensioning strips supplied over the machine feet.
The material provided is intended for use in bolting the machine to a
concrete floor. For other types of flooring, please purchase suitable
fitting materials separately.

Electrical connection

The electrical connection must be established by a qualified
electrician.

The electrical connection may only be made to an electrical system
provided in accordance with all appropriate local and national
legislation, regulations and guidelines. Please also observe the
regulations set out by your insurance provider and energy supplier,
accident prevention regulations, as well as recognised codes of
practice.

Reliable and safe operation of this tumble dryer is only ensured if it
has been connected to the mains electricity supply.
The required supply voltage, power rating and fuse rating can be
found on the data plate on the tumble dryer. Ensure that the supply
voltage matches the voltage quoted on the data plate before
establishing the electrical connection to the tumble dryer.
Connection to a supply voltage other than the one quoted on the
data plate can damage the tumble dryer if the voltage is too high.