Calling Up Current Programme Parameters; Programme Running Time/Time Left Estimation - Miele PDR 914 Operating And Installation Instructions

Starting a
programme
Calling up current
programme
parameters
Programme
running time/Time
left estimation
Money may be lost if the drum door is opened or the programme is
cancelled.
Depending on the settings, money may be lost in the payment
system if the drum door is opened or the programme is cancelled.
Do not open the door once the programme has started.
Do not cancel a drying programme while it is running.
The programme can be started once the Start/Stop sensor is flashing
on and off.
Touch the Start/Stop sensor.

If a Delay start period has been selected, this will appear in the
display.
The drying programme will start either straight away or once the
Delay start period has elapsed. The programme time left is shown in
the display.
During the programme running time, you can use the pull-down menu
to view the parameters of the current drying programme (e.g. drying
level, load capacity, selected Extras, drying temperature).
 
Status

Time left
Cottons
To call up the pull-down menu, swipe your finger from top to

bottom while the programme is running.

Parameter info
Normal
7,0 kg

 64 °C
The pull-down menu displays the parameters of the drying
programme.
To close the pull-down menu again, swipe your finger from bottom

to top.
The programme running time depends on the quantity of laundry, the
type of fabric, the residual moisture in the laundry and the water
hardness. The displayed programme running time for drying level
programmes can therefore vary or "jump". The tumble dryer's
electronic module adapts during the ongoing drying programme. The
displayed programme running time becomes more and more
accurate.
11:02
2:27 h
Drying
Drying
27