Selecting Programme Packages; Completing The Initial Commissioning Process - Miele PDR 914 Operating And Installation Instructions

Using for the first time
Skipping payment
system set-up
20

Selecting programme packages

You can select various programmes from the programme packages.
Any programmes already active are highlighted in orange.
Programme packages
Label Standard
Cottons Cottons
Cottons PRO
Minimum iron
Swipe to the left with your finger until you reach a programme that

is not highlighted in orange.
Touch the programme to be activated.

The selected programme is now active and highlighted in orange.
You can select further programmes if required.
If you do not want to select any more programmes, confirm with the

OK
sensor.
The display will change to the next setting.
Useful tip: You can disable a selected programme by touching the
programme again. Exception: The
programmes cannot be disabled.
Setting up a payment system
If you wish to set up a payment system, see "Supervisor level -
Payment system". These settings can only be changed during the
initial commissioning process. If you wish to change the settings later,
please contact Miele.
If you do not wish to set up a payment system, you can skip this step.
Payment system
No payment
Timed
system
operation
Programme Timed op. +
control impul.counter
No payment system
Touch the

OK
Touch to confirm.

The display will change to the next setting.

Completing the initial commissioning process

The commissioning process is complete when a programme lasting
longer than 10 minutes has been carried out in full.
11:02
Woollens
Delicates
OK
Cottons
11:02
COM module
OK
sensor.
Cottons PRO
and