Table of Contents
Advertisement
Bar display state
■
The meters and display illuminate when
The engine switch is in ON.
■
Outside temperature display
In the following situations, the correct
●
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
●
When "--" or "E" is displayed, the system
may be malfunctioning. Take your vehicle
to your Lexus dealer.
Distance to empty
■
This distance is computed based on your
●
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
●
When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the engine
switch off. If the vehicle is refueled with-
out turning the engine switch off, the dis-
play may not be updated.
Liquid crystal display
■
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
Free/Open Source Software Informa-
■
tion
This product contains Free/Open Source
Software (FOSS). The license information
2-1. Instrument cluster
and/or the source code of such FOSS can
be found at the following URL.
https://www.denso.com/global/en/
opensource/meter/toyota/
WARNING
■
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver's shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
death or injury.
NOTICE
To prevent damage to the engine and
■
its components
Do not let the indicator needle of the
●
tachometer enter the red zone, which
indicates the maximum engine speed.
●
The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or "Engine Cool-
ant Temp High Stop in a Safe Place
See Owner's Manual" is shown on the
multiinformation display. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.519)
Odometer and trip meter dis-
play
Display items
■
Odometer
Displays the total distance the vehicle has
83
2
Advertisement
Table of Contents
