Table of Contents
Advertisement
62
1-2. Child safety
raise it to the uppermost position.
2
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top tether
strap.
Make sure the top tether strap is securely
latched. (P.55)
When installing the child restraint system
with the head restraint being raised, be
sure to have the top tether strap pass
underneath the head restraint.
Outboard rear seats
Hook
A
Top tether strap
B
Rear center seat
Hook
A
Top tether strap
B
■
Laws and regulations pertaining to
anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming to
FMVSS213 or CMVSS213 specifications
can be used.
This vehicle is designed to conform to SAE
J1819.
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Firmly attach the top tether strap and
make sure that the belt is not twisted.
Do not attach the top strap to anything
●
other than the anchor bracket.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
●
When installing the child restraint sys-
tem with the head restraint being
raised, after the head restraint has
been raised and then the anchor
bracket has been fixed, do not lower
the head restraint.
Advertisement
Table of Contents
