Table of Contents
Advertisement
318
4-5. Using the driving support systems
3
Even though the objects are outside of the detection area of the side sensors or
side cameras, a warning is displayed and a buzzer sounds.
Object warning function operating con-
■
ditions
The object warning function is operational
when the intuitive parking assist OFF indi-
cator is not illuminated or flashing and any
of the following conditions is met:
The Advanced Park is operating.
●
The vehicle moves approximately 23.0 ft.
●
(7 m) after the engine is started.
●
The R shift position is selected.
After the D shift position has been
●
selected, the vehicle has moved 23.0 ft.
(7 m) or less.
●
Camera switch has been pressed and the
center display is displayed.
●
The front or rear sensor detects a station-
ary object.
■
Detection of objects along the sides of
the vehicle
●
Objects along the sides of the vehicle are
not instantaneously detected. The loca-
tion of objects in relation to the vehicle is
estimated after they are first detected by
the front or rear side sensors, or side
cameras. Therefore, after the engine
switch is changed to ON, even if an
object is along the side of the vehicle, it
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
If a vehicle, person, animal, etc. is
●
detected by a side sensor or side camera,
but then leaves the detection area of the
side sensor or side camera, the system
will assume the object has not moved.
WARNING
Object warning function
■
In situations such as the following, the
function may not operate correctly, pos-
sibly leading to an accident. Proceed
carefully.
●
When starting off shortly after the
engine switch is turned to ON and a
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off, as
the vehicle on the left will not be
detected and the object warning function
will not operate.
●
When an object or person is in a posi-
tion which cannot be detected by the
side sensors or side cameras.
●
When, after the side sensors or side
cameras have completed scanning the
areas along the sides of the vehicle, a
vehicle, person, or other object
approaches the side of the vehicle and
cannot be detected.
●
When the outside rear view mirror is
closed, the side sensors or side cam-
eras cannot detect objects.
If the 12-volt battery was discharged or
●
has been removed and installed, fold
and extend the outside rear view mir-
rors.
Advertisement
Table of Contents
