Table of Contents
Advertisement
3
Within 1 minute of pressing the
®
HomeLink
button, after the
garage door operation has
stopped, press the "Learn" or
"Smart" button on the garage door
opener motor. Within 5 seconds of
the establishment of 2-way com-
munication with the garage door
opener, both garage door opera-
tion indicators in the vehicle will
flash rapidly (green) and the light
on the garage door opener motor
will blink twice, indicating that
2-way communication is enabled.
Reprogramming a single Home-
■
®
Link
button
When the following procedure is per-
formed, buttons which already have
devices registered to them can be
overwritten:
1
Press and hold the desired Home-
®
Link
button.
2
When the HomeLink
starts flashing orange, release the
®
HomeLink
button and perform
"Programming HomeLink
takes 20 seconds for the Home-
®
Link
indicator to start flashing).
■
Before programming
Install a new battery in the transmitter.
●
●
The battery side of the transmitter must
be pointed away from the HomeLink
buttons.
Operating HomeLink
Press the appropriate HomeLink
5-5. Using the other interior features
button. The HomeLink
should turn on.
The status of the opening and closing
of a garage door is shown by the indi-
cators.
Vehicles with auto anti-glare inside
rear view mirror
Opening
A
Closing
B
Vehicles with Digital Rearview Mir-
ror
®
indicator
®
" 1 (it
Opening
A
Closing
B
This function is only available if the garage
door opener motor used is a compatible
®
device. (To check device compatibility,
refer to www.homelink.com.)
®
®
419
®
indicator light
5
Advertisement
Table of Contents
