Table of Contents
Advertisement
Depending on the condition of the vehicle
and road surface, the break suggestion
function may not operate.
Vehicles without a head-up display: Press
the
meter control switch to turn off the
*1
message.
Vehicles with a head-up display: Press the
steering switch to turn off the mes-
*1
sage.
Unless
or
is pressed, the message
of the break suggestion function will remain
*1
displayed.
*1
*3
: For Puerto Rico
*2
: Except for Puerto Rico
*3
: The countries and areas for each region
listed in the table are current as of
October 2022. However, depending
on when the vehicle was sold, the coun-
tries and areas of each region may be
different. Contact your Lexus dealer for
details.
Changing LDA settings
The LDA system can be
Displays and system operation
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
4-5. Using the driving support systems
enabled/disabled through a custom-
ize setting. (P.543)
The settings of the LDA can be
changed on the customize settings.
(P.543)
■
Situations in which the system may
not operate properly
In the following situations, the system
may not operate properly and the vehicle
may depart from its lane. Do not overly
rely on these functions. The driver is
solely responsible for paying attention to
their surroundings and operating the
steering wheel as necessary to ensure
safety.
When the boundary between the
●
asphalt and grass, soil, etc., or struc-
tures, such as a curb, guardrail, etc. is
not clear or straight
When the vehicle is struck by a cross-
●
*3
wind or the turbulence of other nearby
vehicles
●
Situations in which the lane may not be
detected: P.235
●
Situations in which the sensors may not
operate properly: P.234
Situations in which some or all of the
●
functions of the system cannot oper-
ate: P.235
When it is necessary to disable the sys-
●
tem: P.229
WARNING
259
4
Advertisement
Table of Contents
