Table of Contents
Advertisement
Wheel chock posi-
Flat tire
In front of the front
Rear left-hand side
right-hand side tire
In front of the front
Rear right-hand side
left-hand side tire
2
Using a wheel bolt wrench, slightly
loosen the wheel bolts (approxi-
mately one turn).
3
Turn the tire jack portion
hand until the notch of the jack is in
contact with the jack point.
The jack point guides are located under
the rocker panel. They indicate the jack
point positions.
7-2. Steps to take in an emergency
4
Install the wheel bolt wrench to the
jack handle.
tions
5
Raise the vehicle until the tire is
slightly raised off the ground.
by
A
6
Remove the uppermost wheel bolt
and install the guide pin
hand.
Turn the guide pin clockwise to tighten it
until it stops.
7
Remove all the wheel bolts and the
tire.
When resting the tire on the ground, place
the tire so that the wheel design faces up to
503
by
A
7
Advertisement
Table of Contents
