Do you have a question about the RX450H and is the answer not in the manual?
Questions and answers
Julia Bradley
April 14, 2025
How do I change the color on my 2022 Lexus 450H navigation GPS. Mine is set on grey and I do not like it. I cannot find the map color customization. Thank you.
1 comments:
Mr. Anderson
April 15, 2025
To change the map color on the 2022 Lexus RX450h navigation GPS, go to the map display settings and adjust the color under the map display options. Specific steps are not detailed, but this setting is part of the map display customization features.
This answer is automatically generated
Kevin Moore
May 14, 2025
How do I use the navigation system on my 2017 Lexus RX 450H ? Is a subscriptions required to use it How much ?
Page 1
TABLE OF CONTENTS QUICK GUIDE BASIC FUNCTION NAVIGATION SYSTEM PHONE AUDIO/VIDEO SYSTEM AIR CONDITIONING VOICE COMMAND SYSTEM INFORMATION LEXUS ENFORM WITH SAFETY CONNECT PERIPHERAL MONITORING SYSTEM INDEX RX450h/350_Navi_U...
The accuracy of the vehicle’s position de- pends on satellite conditions, road configuration, vehicle condition or other circum- stances. For more information on the limitations of the system, refer to pages 144 through 146. RX450h/350_Navi_U...
Page 3
The symbol of a circle with a slash through it means “Do not”, “Do not do this”, or “Do not let this happen.” Arrows indicating operations Indicates the action (pushing, turning, etc.) used to operate switches and other devic- Indicates the outcome of an operation (e.g. a lid opens). RX450h/350_Navi_U...
Different writing styles for gasoline and hybrid vehicles Example When the “POWER”* <“ENGINE START STOP”>* switch is in ACCESSORY or <IGNITION ON>* mode, the initial screen will be displayed and the system will begin operating. : Vehicles with hybrid system : Vehicles with gasoline engine RX450h/350_Navi_U...
Page 5
Use this system only in locations where it is vehicle is not moving, can the destination legal to do so. Some states/provinces may and route selection be done. have laws prohibiting the use of video and navigation screens next to the driver. RX450h/350_Navi_U...
1. BASIC INFORMATION BEFORE SYSTEM..............144 OPERATION ..........32 INITIAL SCREEN ..........32 HOW TO USE THE Remote Touch .....34 INPUTTING LETTERS AND NUMBERS/LIST SCREEN OPERATION............36 SCREEN ADJUSTMENT ........39 MAP SCREEN OPERATION......41 2. SETUP..............52 GENERAL SETTINGS ........52 VOICE SETTINGS ..........65 RX450h/350_Navi_U...
Page 7
PHONE SETTINGS ........... 175 iPod OPERATION ..........262 ® Bluetooth SETTINGS........197 ® Bluetooth AUDIO OPERATION ...269 REAR SEAT ENTERTAINMENT SYSTEM FEATURES ........279 AUDIO/VIDEO REMOTE CONTROLS (STEERING SWITCHES) ......300 AUDIO/VIDEO SYSTEM OPERATING HINTS........302 2. SETUP ..............312 AUDIO SETTINGS ..........312 RX450h/350_Navi_U...
Page 8
TABLE OF CONTENTS LEXUS ENFORM WITH AIR CONDITIONING SAFETY CONNECT 1. AIR CONDITIONING SYSTEM OPERATION ..........316 1. LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW ..... 370 QUICK REFERENCE ........316 FUNCTIONAL OVERVIEW....... 370 SOME BASICS.............318 TYPE A: FUNCTION ACHIEVED BY AIR CONDITIONING SYSTEM USING A CELLULAR PHONE....371...
GUIDING THE ROUTE......18 6. SETTING HOME AS THE DESTINATION ......... 19 FUNCTION INDEX 1. NAVIGATION SYSTEM FUNCTION INDEX....... 20 QUICK REFERENCE 1. “Menu” SCREEN........22 2. “Destination” SCREEN......24 3. “Setup” SCREEN ........26 4. “Information” SCREEN......28 RX450h/350_Navi_U...
Page 11
Move in the desired direction to select a function, Remote Touch letter and map screen button. knob Press to enter the selected function, letter or map screen button. RX450h/350_Navi_U...
This figure indicates the map scale. Zoom out button Select to reduce the map scale. Select to obtain a broader view. Some of the but- “ Off” tons on the screen will not be displayed. They are displayed again by selecting “On ”. RX450h/350_Navi_U...
Page 13
●When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen without polarized sunglasses. RX450h/350_Navi_U...
Select “Enter” and press the Remote Touch knob. Select “Go Home” and press the Remote Touch knob. The “Edit Home” screen is displayed. If a home address has not been regis- tered, it can be registered by selecting “Go Home”. RX450h/350_Navi_U...
Page 15
“REGISTERING HOME” on page 112.) The name, location, phone number and icon can be changed. (See “EDITING HOME” on page 113.) The registered points can be used on the “Destination” screen. (See “DESTINA- TION SEARCH BY HOME” on page 71.) RX450h/350_Navi_U...
Select one of the preset destination Remote Touch knob. buttons and press the Remote Touch knob. The “Edit Preset Destination” screen is A preset destination can be set to any pre- displayed. set destination button that has not yet been set. RX450h/350_Navi_U...
Page 17
DESTINATIONS” on page 114.) The name, location, phone number and icon can be changed. (See “EDITING PRESET DESTINATIONS” on page 115.) The registered points can be used on the “Destination” screen. (See “DESTINA- TION SEARCH BY PRESET DESTINA- TIONS” on page 71.) RX450h/350_Navi_U...
(See “STARTING search destinations. (See “DESTI- NATION SEARCH” on page 70.) ROUTE GUIDANCE” on page 89.) Guidance to the destination is displayed Page 1 on the screen and can be heard via voice guidance. Page 2 RX450h/350_Navi_U...
“Go Home” can be used if your home ad- dress has been registered. (To register home, see “REGISTERING HOME” on page 112.) Your home address is set as the destina- tion. The navigation system performs a search for the route. RX450h/350_Navi_U...
Route guidance Before starting route guidance Page Setting the destination Viewing alternative routes Starting route guidance Before starting or during route guidance Page Viewing the route Adding destinations Changing the route Displaying the estimated travel/arrival time to the destination RX450h/350_Navi_U...
Page 21
Page Displaying vehicle maintenance Hands-free system (for cellular phone) Page ® Initiating Bluetooth ® Making a call on a Bluetooth phone ® Receiving a call on the Bluetooth phone Voice command system Page Operating the system with your voice RX450h/350_Navi_U...
3. QUICK REFERENCE 1. “Menu” SCREEN Press the “MENU” button on the Remote Touch to display the “Menu” screen. RX450h/350_Navi_U...
Page 23
175, 197, 312, 368, 395, 410 “Phone” Select to display the hands-free operation screen. Select to display the air conditioning control “Climate” screen. “Media” Select to display the media control screen. “Radio” Select to display the radio control screen. RX450h/350_Navi_U...
“Point of Interest” 75, 389 stored in the system’s database. Select to provide you with live assistance finding “Destination destinations via the Lexus Enform with Safety 82, 387 Assist” Connect response center. Select a destination from any of the last 100 previ- “Previous...
Page 25
If a home ad- dress has not been registered, a message will be “Go Home” displayed and the setting screen will automatically appear. (To register home, see “REGISTERING HOME” on page 112.) RX450h/350_Navi_U...
3. QUICK REFERENCE 3. “Setup” SCREEN The items shown on the “Setup” screen can be set. Press the “MENU” button on the Remote Touch, then select “Setup” to display the “Setup” screen. RX450h/350_Navi_U...
Page 27
Select to set vehicle information such as mainte- “Vehicle” nance information. Select to set Lexus Insider, XM Sports, XM “Other” 368, 395 Stocks and XM Fuel Prices. “Audio” Select to HD Radio™ channel and iPod settings.
3. QUICK REFERENCE 4. “Information” SCREEN This screen can be used to display the XM satellite system, fuel consumption, etc. Press the “MENU” button on the Remote Touch, then select “Info/Apps” (“Info”) to display the “Information” screen. RX450h/350_Navi_U...
Page 29
“Traffic Incidents” Select to display traffic incidents. “Map Data” Select to display map data information. “LEXUS Insider” Select to display the “LEXUS Insider” screen. “XM Select to display weather information. NavWeather” Select to display personally selected stocks infor- “XM Stocks”...
SWITCHING THE SCREENS ......46 MAP SCALE..............49 FOOT PRINT MAP ..........50 ORIENTATION OF THE MAP......51 STANDARD MAP ICONS ........51 SETUP 1. GENERAL SETTINGS......52 SCREENS FOR GENERAL SETTINGS..53 2. VOICE SETTINGS........65 SCREEN FOR VOICE SETTINGS ....66 RX450h/350_Navi_U...
Images shown on the initial screen can be changed to suit individual preferences. (See page 59.) CAUTION ●When the vehicle is stopped with the hybrid system operating <the engine run- ning>, always apply the parking brake for safety. RX450h/350_Navi_U...
Page 33
This screen goes off if the screen is not operated for several seconds. To prevent this screen from being dis- played again, select “Do Not Display This Message Again”. To register maintenance information, see “MAINTENANCE” on page 137. RX450h/350_Navi_U...
●Do not allow fingers, fingernails or hair to become caught in the Remote Touch as this may cause an injury. ●Be careful when touching the Remote Touch in extreme temperatures as it may become very hot or cold due to the tem- perature inside the vehicle. RX450h/350_Navi_U...
Page 35
●If your hand or any object is on the Remote Touch knob when the “POWER” <“ENGINE START STOP”> switch is turned to ACCESSORY mode, the Remote Touch knob may not operate properly. INFORMATION ●Under extremely cold conditions, the Remote Touch knob may react slowly. RX450h/350_Navi_U...
Select the symbol keys directly to enter symbols. Select the keys directly to enter letters or numbers. : Select to erase one symbol. Select and hold to continue erasing symbols. : Select to erase one character. Select and hold to continue erasing characters. RX450h/350_Navi_U...
Page 37
If the num- ber of matching items is more than 999, INFORMATION the system displays “” on the screen. ●The “ ” and “ ” buttons on the Remote Touch can be used to scroll up and down on list screens. RX450h/350_Navi_U...
Page 38
Select to sort in order of “Icon” icon. Select to sort in order of “Name” name. Select the desired sorting criteria. Select to sort in order of “Brand” brand name. (XM func- tions) Select to sort in order of “Price” price. (XM functions) RX450h/350_Navi_U...
“Camera”: Select to adjust the image the SCREEN SETTINGS camera displays. ADJUSTMENT Adjusting the image the camera displays ADJUSTING SCREEN DISPLAY AND CAMERA SETTINGS Press the “MENU” button on the Remote Touch. “Map·Menu”: Select to return to the screen display settings. Select “Display”. RX450h/350_Navi_U...
Page 40
After adjusting the screen, select “OK”. The screen goes off when “Screen Off” is selected. To turn the screen back on, press any button on the audio panel or on the Remote Touch. The selected screen appears. RX450h/350_Navi_U...
The screen can be returned to this map screen that shows the current position at any time, from any screen by pressing the “MAP/VOICE” button on the Remote Touch. To correct the current position manually, see page 134. RX450h/350_Navi_U...
( ). Distance from the current position to will also be shown ( The screen changes and displays the map location of the selected destination and the route preference. (See “STARTING ROUTE GUIDANCE” on page 89.) RX450h/350_Navi_U...
Page 43
To change the icon or name, etc., see “EDITING ADDRESS BOOK ENTRIES” on page 117. INFORMATION ●Up to 100 address book entries can be registered. If there is an attempt to regis- ter more than 100 address book entries, an error message will appear. RX450h/350_Navi_U...
Page 44
“Mark”. (See “REGISTER- ING ADDRESS BOOK ENTRIES” on page 117.) If is selected, the registered phone number can be called. The desired POI can be displayed on the map screen. (See “DISPLAY POI ICONS” on page 107.) RX450h/350_Navi_U...
Information such as the name, address, phone number can be called. position and phone number are dis- played. To delete a destination, select “Delete”. If is selected, the registered phone number can be called. RX450h/350_Navi_U...
Select “Info”. Select the screen buttons to select the desired configuration. Traffic information will be displayed on the screen. Depending on the conditions, certain screen configuration buttons cannot be selected. To display detailed traffic event information, select “Detail”. RX450h/350_Navi_U...
Page 47
Select to display the free- If a different screen is displayed, select “Freeway way exit list screen. (See “Audio” on the “Map Mode” screen. Exit List” page 93.) For audio system operation, refer to “AUDIO/VIDEO SYSTEM OPERA- TION”. (See page 212.) RX450h/350_Navi_U...
Page 48
The screen returns to the dual map screen. This screen shows the dual map. The map on the left is the main map. While on a different screen, selecting “Dual map” will display the dual map screen. RX450h/350_Navi_U...
When the map scale is at the min- imum range of 150 ft. (50 m), is not shown. In areas where the foot print map is available the map scale changes from when at the minimum range. RX450h/350_Navi_U...
150 ft. (50 m). ●On the foot print map, a one way street is displayed by ●It is not possible to perform scrolling on the foot print map while driving. Building footprints in the database were created provided MAPMASTER. RX450h/350_Navi_U...
Regardless of the direction of vehicle travel, north is always up. Golf : Heading-up symbol The direction of vehicle travel is always up. Both the north-up and heading-up sym- bols display the vehicles direction as a letter (e.g. N for north). RX450h/350_Navi_U...
1. GENERAL SETTINGS Select the items to be set. Used for language selection and the on/ off settings of operation sounds and au- tomatic screen change, etc. Press the “MENU” button on the Remote Touch. Select “Save”. Select “Setup”. Select “General”. RX450h/350_Navi_U...
“On” or “Off”. If “On” is selected, the screen will automatically return to the previous screen from the audio/ air conditioning control screen after 20 seconds. On this screen, the following functions can be performed: RX450h/350_Navi_U...
Page 54
FORCE” on page 63.) Select to delete personal data. (See “DELETING PERSONAL DATA” on page 63.) Select to update program versions. For details, contact your Lexus deal- Select to update gracenote database versions. For details, contact your Lexus dealer. RX450h/350_Navi_U...
Page 55
UAL CLOCK SETTING” on page Select the desired time zone. 56.) Select “Save”. If “Other” is selected, the zone can be adjusted manually. Select “+” or “-” to adjust the time zone and then select “OK”. Select “Save”. RX450h/350_Navi_U...
Page 56
“-” to set the time back one minute. Select to round to the “Minutes” “:00” nearest hour*. Select “Yes”. *e.g. 1:00 to 1:29 1:00 1:30 to 1:59 2:00 The previous screen will be displayed. Select “Save”. Select “Save”. RX450h/350_Navi_U...
Page 57
Select the desired screen button color. The previous screen will be displayed. Select “Save”. The previous screen will be displayed. This function is available only in English Select “Save”. or Spanish. To change language, see “SELECTING A LANGUAGE” on page RX450h/350_Navi_U...
Page 58
Press the “MENU” button on the Remote Touch, then select “Setup”. Select “General” on the “Setup” screen. Select “Keyboard Layout”. “QWERTY” type Select “ABC” or “QWERTY” of “Key- board Layout” to change the keyboard layout. The previous screen will be displayed. Select “Save”. RX450h/350_Navi_U...
Page 59
●Image files of 10 MB or less can be saved. is not turned on. ●Up to 3 images can be downloaded. Close the console box. Press the “MENU” button on the Remote Touch, then select “Setup”. Select “General” on the “Setup” screen. RX450h/350_Navi_U...
Page 60
Select “Save”. Select “Yes”. ■ DELETING TRANSFERRED IMAG- Press the “MENU” button on the Remote Touch, then select “Setup”. Select “General” on the “Setup” screen. Select “Customize Startup Image” on the “General Settings” screen. Select “Delete All”. Select “Yes”. RX450h/350_Navi_U...
Page 61
Pull up the lever to release the lock, and lift the armrest. Select “Transfer”. Select “Yes”. Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on. RX450h/350_Navi_U...
Page 62
DELETING TRANSFERRED IMAG- Press the “MENU” button on the Remote Touch, then select “Setup”. Select “General” on the “Setup” screen. Select “Customize Screen Off Image” on the “General Settings” screen. Select “OK”. Select “Delete All”. Select “Save”. Select “Yes”. RX450h/350_Navi_U...
Page 63
The strength of this pull can Select “Delete Personal Data”. be adjusted. Press the “MENU” button on the Remote Touch, then select “Setup”. Select “General” on the “Setup” screen. Select “Feedback Force”. Select “Delete”. Select “+” or “-”. Select “Yes”. Select “OK”. Select “Save”. RX450h/350_Navi_U...
Page 64
• Phone sound settings • Phone display settings • Message settings • Audio/video setting ® • Bluetooth audio setting • Startup image data • Screen off image data • Downloaded Apps INFORMATION ●This function is not available while driving. RX450h/350_Navi_U...
2. SETUP 2. VOICE SETTINGS Select the items to be set. Voice guidance etc. can be set. Press the “MENU” button on the Remote Touch. Select “Save”. Select “Setup”. Select “Voice”. RX450h/350_Navi_U...
“On” or “Off”. (See “TRAFFIC INCI- DENT WARNING” on page 67.) When using the XM NavWeather™ function, the severe weather warning can be set to “On” or “Off”. To reset all setup items, select “Default”. RX450h/350_Navi_U...
If voice guidance is not needed, select “Off” to disable the feature. Select “Save”. Select “Save”. INFORMATION ●When the “Traffic Information” indicator is dimmed, “Avoid Traffic”, “Traffic Incident Warning” and “Show Free Flowing Traffic” will not operate. (See page 366.) RX450h/350_Navi_U...
One of 11 different methods can be used to search a destination. (See pages 71 through 87.) INFORMATION ●When searching a destination, the response to the screen button may be slow. The previous screen will be displayed. RX450h/350_Navi_U...
Remote Touch. (See “Remote Touch” on page 10.) Select “Destination” on the “Menu” screen. Select “Address” on the “Destination” screen. Select the desired search method. Input a city name. Select the screen button of the desired city name from the displayed list. RX450h/350_Navi_U...
Page 73
Input a house number. INFORMATION ●If the navigation system has never been used, this function will not be available. If the same address exists in more than 1 city, the current screen changes to the address list screen. RX450h/350_Navi_U...
Page 74
Input a city name. After inputting the house number, select “OK” to display the screen for inputting the Select the screen button of the desired street name. city name from the displayed list. Input the street name and select “OK”. RX450h/350_Navi_U...
(See “STARTING ROUTE GUIDANCE” on page 89.) When inputting the name of a specific POI, and there are 2 or more sites with the same name, the list screen is displayed. RX450h/350_Navi_U...
Page 76
To cancel the city setting, select “Any City”. INFORMATION Select the screen button of the desired ●To search for a facility name using multi- city name from the displayed list. ple search words, put a space between each word. RX450h/350_Navi_U...
Page 77
When the desired category is selected, the Select to set the search point from POI name list screen is displayed. along the selected route. Select to set the search point from near a city center. Select to set the search point from near a destination. RX450h/350_Navi_U...
Page 78
The search point is set and the “POI Cate- gory” screen will be displayed. (See page 80.) The search point is set and the “POI Cate- gory” screen will be displayed. (See page 80.) *: XX represents the selected search area name. RX450h/350_Navi_U...
Page 79
The search point is set and the “POI Cate- city center name. gory” screen will be displayed. (See page 80.) The search point is set and the “POI Cate- gory” screen will be displayed. (See page 80.) *: XX represents the selected search area name. RX450h/350_Navi_U...
Page 80
If “Favorite POI Categories” is selected, a search can be performed using the 6 POIs that have been previously set. For more details, see “POI CATEGORY CHANGE (SELECT POI ICONS)” on page 132. Select the desired POI category from the list. RX450h/350_Navi_U...
Page 81
“OK”. With the eDestination feature, you can go When a phone number is input, the “Con- online, via the Lexus.com owner’ s Web site, firm Destination” screen may be displayed. to select and organize destinations of your If “Go” is selected on the “Confirm Desti- choice and then wirelessly send them to nation”...
Destination Assist provides you with live Select the screen button of the desired assistance for finding destinations via the destination. Lexus Enform with Safety Connect response center. You can request either a specific business, address, or ask for help locating your desired destination by cate-...
When the desired address book entry is selected, the “Confirm Destination” screen may be displayed. If “Go” is selected on the “Confirm Destination” screen, the naviga- tion system performs a search for the route. (See “STARTING ROUTE GUIDANCE” on page 89.) RX450h/350_Navi_U...
●The navigation system does not guide in areas where route guidance is unavail- able. (See page 145.) ●The emergency function can be used even while driving. ●While driving, only the currently dis- played items and the items on the next page can be viewed. RX450h/350_Navi_U...
Page 85
Select the city, and the map location of the selected destination and the route preference. (See “STARTING ROUTE GUID- Input the name of the second intersect- ANCE” on page 89.) ing street. RX450h/350_Navi_U...
Page 86
●Be sure to use the complete name of the freeway or highway, including the hyphen, when entering the destination. Freeways and interstates use an “I” (I-405). US Select “Entrance” or “Exit”. highways use the state designation before the number (CA-118). RX450h/350_Navi_U...
If “Go” is selected on the “Confirm Destination” screen, the naviga- INFORMATION tion system performs a search for the route. ●Guidance starts if “OK” is selected even (See “STARTING ROUTE GUIDANCE” while driving. However, the cursor cannot on page 89.) be moved. RX450h/350_Navi_U...
If “No” is selected, the previous screen will Select the destination to be deleted. be displayed. Set destinations can also be deleted by selecting “Route”. (See “DELETING DESTINATIONS” on page 101.) “Delete All”: Select to delete all destina- tions on the list. RX450h/350_Navi_U...
The system starts route search and displays Select to display a list of the turns re- recommended routes. quired to reach the destination. Select to change the route. (See page 91.) Select the desired route from 3 pos- sible routes. (See page 90.) RX450h/350_Navi_U...
Page 90
Select to display the information tion. The road nearest to the point shown below about each of the 3 selected is set as the destination. routes. RX450h/350_Navi_U...
Page 91
Freeway Ferry Function Page Select to add destinations. Select to delete destina- tions. Select to reorder destina- tions. Select to display the choic- es available when setting the conditions the system uses to determine the route to the destination. RX450h/350_Navi_U...
Page 92
(See page 104.) ●If the calculated route includes a trip by ferry, the route guidance shows a sea route. After you travel by ferry, the cur- rent position may be incorrect. Upon reception of GPS signals, it is automati- cally corrected. RX450h/350_Navi_U...
Select to display the closest 3 junc- top of the screen. Selecting “Off” clears tions or exits. the display. ●When the head-up display is on, turn-by- turn guidance arrows will be displayed on the windshield. RX450h/350_Navi_U...
Page 94
Select “Intersection”, or press the “MAP/ screen. VOICE” button on the Remote Touch, to Select “Intersection”, or press the “MAP/ change back to the intersection guidance VOICE” button on the Remote Touch, to screen. change back to the freeway guidance screen. RX450h/350_Navi_U...
Page 95
Select “Turn List” during guidance to display the turn list. Function Function Exit number or street name Turn direction Turn direction Distance between turns Distance to the next turn Next street or destination name Current street name Current street name RX450h/350_Navi_U...
●On freeways, interstates or other high- ways with higher speed limits, the voice guidance will be made at earlier points than on city streets in order to allow time to maneuver the vehicle. RX450h/350_Navi_U...
Page 97
To adjust the voice guidance volume, see “VOICE VOLUME” on page 67. INFORMATION ●If the system cannot determine the cur- rent position correctly (in cases of poor GPS signal reception), the voice guid- ance may be early or late. RX450h/350_Navi_U...
Page 98
Please carefully ob- serve the local traffic restrictions, as they may not match the navigation guidance.” IPD roads are roads that are not yet com- pletely digitized in our database. How- ever, their geometry, name administrative coding are already known. RX450h/350_Navi_U...
The distance, estimated travel time and estimated arrival time from the current position to the selected destination are dis- played. RX450h/350_Navi_U...
“Move Up” or “Move Down” to change the arrival order. Select the desired “Add Destination Here” to insert the new destination into the route. After selecting the destinations, select “OK”. The system searches for the guidance route again, and displays the entire route. RX450h/350_Navi_U...
When more than 1 destination is set, a list will be displayed on the screen. Select the destination to be deleted. “Delete All”: Select to delete all destina- tions on the list. A message appears to confirm the request to delete. RX450h/350_Navi_U...
5, 15 and 25 miles (or 5, 15 and 25 km if units are in km). ●The system may not be able to calculate a detour route depending on the selected distance and surrounding road condi- tions. RX450h/350_Navi_U...
The street names will be dis- Select to display a list of the turns re- played in order from the starting point, quired to reach the destination. along with the distance to the next turn. Select to start guidance. RX450h/350_Navi_U...
(See page 91.) TO SELECT ROUTE FEATURES Select “Preferences”. A number of choices are available when setting the conditions the system uses to determine the route to the destination. Select “Route”. Select “Preferred”, “Short” or “Alter- nate” and select “OK”. RX450h/350_Navi_U...
Page 105
The system will avoid using routes that include items whose indicators are off. After selecting the desired route prefer- ence, select “OK”. Select “Start from Adjacent Road”. INFORMATION ●When there is no adjacent road, this screen button will not be displayed. RX450h/350_Navi_U...
Select “Pause Guidance”. The map screen, with the current position displayed, will be returned to. The screen will return to the current posi- tion map without route guidance. INFORMATION ●Without route guidance, “Pause Guid- ance” cannot be used. RX450h/350_Navi_U...
“Change POI” is displayed. Select “Other POIs” on the “Select POI Icons” screen. When a POI category is selected from either the limited list or the complete list, the icons of those locations will be dis- played on the map screen. RX450h/350_Navi_U...
Page 108
“Near...”: Select to search for POIs near the and then selecting “OK”, the selected current position or along the route. POI icons are displayed on the map screen. • To return to the POI category selection screen, select “More”. RX450h/350_Navi_U...
Page 109
. At this time, the distance from the current position is displayed on the screen. The distance shown is measured as a straight line from the current position to the POI. RX450h/350_Navi_U...
Select “Show on Map”. Selecting “Yes” stops recording and the route trace remains displayed on the screen. Select “Route Trace”. Selecting “No” stops recording and the route trace is erased. The “Route Trace” indicator is highlighted. RX450h/350_Navi_U...
Function Page Select “Setup”. Select to set home. Select to set preset destina- tions. Select to set the address book. Select to set areas to avoid. Select to delete previous destinations. Select to set detailed navi- gation settings. RX450h/350_Navi_U...
Select the desired screen button. When registration of home is completed, the “Edit Home” screen will be displayed. Select “OK”. Function Page To edit registered information, see “EDITING HOME” on page 113. Registering home Editing home Deleting home RX450h/350_Navi_U...
Page 113
Page Select to edit the home name. The name can be dis- played on the map. Select to edit location infor- mation. Select to edit the phone number. Select to change the icon to be displayed on the map. RX450h/350_Navi_U...
(See “DESTINA- TION SEARCH” on page 70.) Select the desired screen button. Function Page Registering a preset desti- nation Editing a preset destination Deleting a preset destina- tion RX450h/350_Navi_U...
Page 115
Select to change the icon to be displayed on the map. “Show Name on Map”: The name of a pre- set destination can be set to be displayed on the map by selecting “On” or “Off”. (See page 119.) Select “OK”. RX450h/350_Navi_U...
Select to cancel the Registering address book “Unselect All” “Select All” function. entries Editing address book en- Select “Delete”. tries Select “Yes” to delete the preset desti- Deleting address book en- nation and select “No” to cancel the de- tries letion. RX450h/350_Navi_U...
Page 117
Select the screen button of the desired address book entry. After the address book entry has been reg- istered, the “Edit Address Book Entry” screen will be displayed. Select “OK”. To edit registered information, see “EDITING ADDRESS BOOK ENTRIES” on page 117. RX450h/350_Navi_U...
Page 118
119.) try, the selected sound will be heard. Select “OK”. Select the “With Sound” tab on the “Ad- dress Book Entry Icon” screen. Select the desired sound icon. The next screen appears when “Bell (with Direction)” is selected. RX450h/350_Navi_U...
Page 119
Enter the name using the alphanumeric keys. Select “OK”. The previous screen will be displayed. Up to 70 characters can be entered. Select “OK”. The previous screen will be displayed. RX450h/350_Navi_U...
Page 120
Select “Yes” to delete the address book Press the “MENU” button on the entries and select “No” to cancel the de- Remote Touch, then select “Setup”. letion. Select “Navigation” on the “Setup” screen. Select “Address Book” on the “Naviga- tion Settings” screen. RX450h/350_Navi_U...
(See “DESTI- NATION SEARCH” on page 70.) Select the desired screen button. Function Page Registering areas to avoid Editing areas to avoid Deleting areas to avoid RX450h/350_Navi_U...
Page 122
● or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be avoided may be shown. Up to 10 locations can be registered as ● points/areas to avoid. RX450h/350_Navi_U...
Page 123
DISPLAYING NAMES OF AREAS set to “On” or “Off”. TO BE AVOIDED Select “OK”. Select “On”, next to “Show Name on Map”, to display the name of an area to be avoided on the map. Select “Off” not to display it. RX450h/350_Navi_U...
Page 124
Select “OK”. Select “OK”. The previous screen will be displayed. The previous screen will be displayed. RX450h/350_Navi_U...
Select the previous destination to be de- leted. Screen button Function Select all registered ar- “Select All” eas to avoid. Select to cancel the “Unselect All” “Select All” function. Select “Delete”. Select “Yes” to delete the area(s) and select “No” to cancel the deletion. RX450h/350_Navi_U...
Page 126
3. ADDRESS BOOK Screen button Function Select all previous desti- “Select All” nations. Select to cancel the “Unselect All” “Select All” function. Select “Delete”. Select “Yes” to delete the destination(s) and select “No” to cancel the deletion. RX450h/350_Navi_U...
Select “Detailed Navi. Settings”. Settings are available for driving speeds, favorite POI categories, automatic screen change, “ Off” function, etc. Press the “MENU” button on the Remote Touch. Select the items to be set. Select “Setup”. Select “Save”. Select “Navigation”. RX450h/350_Navi_U...
(See “POI CATEGORY CHANGE (SELECT POI ICONS)” on page 132.) Select to set screen buttons to be displayed on the map screen when “ Off” selected. (See “SCREEN LAYOUT FUNCTION (“ Off” Function)” on page 133.) RX450h/350_Navi_U...
Page 129
Select “ ” or “ ” to set the average ve- hicle speeds for “Residential”, “Main Streets” and “Freeways”. To set the default speeds, select “Default”. To use settings based on traffic information, select “Consider Traffic Info.”. After setting of the desired speeds is completed, select “Save”. RX450h/350_Navi_U...
Page 130
Remote Touch, then select “Setup”. tions such as traffic jams and construction Select “Navigation” on the “Setup” work. screen. ●Up to 99 hours 59 minutes can be dis- played. Select “Detailed Navi. Settings” on the “Navigation Settings” screen. Select “Avoid Traffic”. RX450h/350_Navi_U...
Page 131
Warning” and “Show Free Flowing Traffic” will not operate. (See page 366.) Select “Show Free Flowing Traffic”. Select “On” or “Off”. Select “Save”. INFORMATION ●When the “Traffic Information” indicator is dimmed, “Avoid Traffic”, “Traffic Incident Warning” and “Show Free Flowing Traffic” will not operate. RX450h/350_Navi_U...
Page 132
“List All Categories” to list Select “Detailed Navi. Settings” on the all POI categories. “Navigation Settings” screen. Select the desired category. Select “Favorite POI Categories”. The screen returns to the “Favorite POI Categories” screen. Select the category to be changed. Select “OK”. RX450h/350_Navi_U...
Page 133
Select “Navigation” on the “Setup” screen. To set the setting as a default, select Select “Detailed Navi. Settings” on the “Default”. “Navigation Settings” screen. Select “OK”. Select ““ Off” Function”. The previous screen will be displayed. Select “Save”. RX450h/350_Navi_U...
Page 134
Select the desired screen button. Select “OK”. For additional information on the accu- racy of a current position, see “LIMITA- TIONS NAVIGATION SYSTEM” on page 144. RX450h/350_Navi_U...
Page 135
The message appears and the quick dis- tance calibration is automatically started. A few seconds later, a map will be displayed. INFORMATION ●If this procedure is not performed when the tires are replaced, the current posi- tion mark may be incorrectly displayed. RX450h/350_Navi_U...
Page 136
4. SETUP This message appears when the map scale is over 0.5 miles (800 m). This message appears when the map is switched to dual map screen mode. RX450h/350_Navi_U...
(See page 33.) Press the “MENU” button on the Remote Touch. Select the desired screen button. Setting maintenance information. (See page 138.) Select “Setup”. Setting dealer. (See page 140.) Select “Vehicle”. RX450h/350_Navi_U...
Page 138
Replace air filter New information items “Personal” can be created separately from provided ones. Select to cancel all condi- “Delete All” tions which have been in- put. Select to reset the item “Reset All” which has satisfied a con- dition. RX450h/350_Navi_U...
Page 139
●For scheduled maintenance information, refer to “Warranty and Services Guide/ Owner’ s Manual Supplement/Scheduled Maintenance”. ●Depending on driving or road conditions, the actual date and distance maintenance should be performed may differ from the stored date and distance in the system. RX450h/350_Navi_U...
Page 140
(See “DES- Select to set the displayed dealer as a destination. TINATION SEARCH” on page 70.) When “Set Dealer” registration is finished, the “Dealer” screen is displayed. RX450h/350_Navi_U...
Page 141
Up to 70 characters can be entered for Select “OK”. dealer and 24 characters for contact. The previous screen will be displayed. Select “OK”. The previous screen will be displayed. RX450h/350_Navi_U...
“Owner’ s Manual”. The previous screen will be displayed. After changing the settings, select “Save”. A message indicating that the settings are being saved will appear. Do not perform any other operations while this message is displayed. RX450h/350_Navi_U...
Page 143
Exhaust gases include harmful carbon monoxide (CO) and inhaling them may lead to death or a serious health hazard. INFORMATION ●To avoid discharging the 12-volt battery, perform the customization procedure with the hybrid system operating <the engine running>. RX450h/350_Navi_U...
GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal recep- tion of the antenna in the instrument panel. We advise against the use of win- dow tinting on vehicles equipped with navigation systems. RX450h/350_Navi_U...
Page 145
• The road and map data stored in the navi- gation system may not be complete or may not be the latest version. After replacing a tire, implement the operation described in “TIRE CHANGE CALIBRATION”. (See page 135.) RX450h/350_Navi_U...
Page 146
The tire pressure also affects the diame- ter of the tires, so make sure that the tire pressure of all 4 tires is correct. RX450h/350_Navi_U...
BY CALL HISTORY ..........163 ® SELECTING A Bluetooth PHONE.... 202 BY VOICE RECOGNITION......165 SELECTING PORTABLE PLAYER....203 CALLING USING AN SMS/ ® DETAILED Bluetooth SETTINGS ....205 MMS MESSAGE ..........167 BY POI* CALL ............167 *: Point of Interest RX450h/350_Navi_U...
1. QUICK REFERENCE ® Bluetooth phones can be operated via the navigation system’s screen. To display the hands-free operation screen, press the “MENU” button on the Remote Touch and then select “Phone”, or the switch on the steering wheel. RX450h/350_Navi_U...
Page 149
The level of reception may not be dis- played depending on the phone you have. When the cellular phone is out of the service area or in a place inac- cessible by radio waves, “No Service” is displayed. RX450h/350_Navi_U...
Ver. 1.0 or higher waves. Radio waves could have unex- SPP (Serial Port Profile) pected effects on the operation of such Ver. 1.1 or higher* medical devices. *: This profile is necessary when using Apps. (See “APPS” on page 380.) RX450h/350_Navi_U...
●Refer http://www.lexus.com/ ® MobileLink to find approved Bluetooth phones for this system. The microphone can be used when talking Bluetooth is a registered trademark of on the phone. Bluetooth SIG, Inc. RX450h/350_Navi_U...
• The roof or windows are open. • The air conditioning vents are pointed towards the microphone. • The sound of the air-conditioning fan is loud. • There is a negative effect on sound quality due to the phone and/or network being used. RX450h/350_Navi_U...
• Image data ●When a phone’ s registration is deleted, • All phone settings the above-mentioned data is also • Message settings deleted. INFORMATION ●Once initialized, the data and settings will be erased. Pay much attention when ini- tializing the data. RX450h/350_Navi_U...
Page 154
(1) il ne doit pas produire de brouillage, et co-located or operated in conjunction (2) l’utilisateur du dispositif doit être prêt with any other antenna or transmitter. à accepter tout brouillage radioélectrique reçu, même si ce brouillage susceptible compromettre le fonctionnement du dispositif. RX450h/350_Navi_U...
Page 155
: mains, poignets, pieds et chevilles). ●The Bluetooth* antenna cannot be removed (or replaced) by user. L’antenne Bluetooth* ne peut pas être supprimé (ou remplacé) par l’utilisateur. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Press the “MENU” button on the Remote Touch. ® If 5 Bluetooth devices have already been registered, a registered device needs to be ® deleted. See “When 5 Bluetooth devices have already been registered” on page 158. RX450h/350_Navi_U...
Page 157
® has a Bluetooth audio function, this can be registered at the same time. ® When another Bluetooth device is cur- rently connected, this screen is displayed. ® To disconnect the Bluetooth device, select “Yes”. RX450h/350_Navi_U...
“No” to cancel the connection. When the “POWER” <“ENGINE START STOP”> switch is in ACCESSORY or ON <IGNITION ON> mode, the system searches for a nearby registered cellular phone. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Page 159
When the cellular phone’ s device name has not been able to be obtained, “Device 1” to “Device 5” will be displayed in the order the phones were registered. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Reconnect the Bluetooth phone manually. ® Now you can use the Bluetooth phone. When a phone is connected while Bluetooth ® audio is playing This screen is displayed, and the ® Bluetooth audio will stop temporarily. RX450h/350_Navi_U...
Select or press the switch on the steering wheel. ® Depending on the type of Bluetooth phone being connected, it may be neces- sary to perform additional steps on the phone. RX450h/350_Navi_U...
Page 162
PHONE NUMBER” on page 178.) Select “No” or “Cancel” to cancel transfer- ring. If your cellular phone is neither PBAP nor OPP compatible, the phonebook cannot be transferred. This screen appears while transferring. To cancel this function, select “Cancel”. RX450h/350_Navi_U...
Calls can be made using registered phone numbers which can be selected Outgoing: calls that were made from a phonebook. (See “REGISTER- ING THE SPEED DIAL” on page 186 for registering the speed dial.) This can be operated while driving. Select “Speed Dials”. RX450h/350_Navi_U...
Page 164
When a phone number registered in the phonebook is received, the name and the number are displayed. Number-withheld calls are also memorized in the system. International phone calls may not be made depending on the type of cellular phone you have. RX450h/350_Navi_U...
When “Call <name> <type>” on the “Short- cut Menu” screen is dimmed, the phone- book’ s voice command recognition cannot ® be used. Check the Bluetooth connec- tion and if the contacts have been trans- ferred to the navigation system. RX450h/350_Navi_U...
Page 166
(number 1 and number 2) to select a phone number from the candidate list. Say “Dial” to call the phone number. RX450h/350_Navi_U...
Select “Yes”. (See page 190.) Select the “SMS/MMS” tab and then select the desired received message from the list. The tab display may vary depending on the type of cellular phone. Select or press the switch on the steering wheel. RX450h/350_Navi_U...
●During international phone calls, the other party’ s name or number may not be displayed correctly depending on the type of cellular phone you have. ●The incoming call display mode can be set. (See “INCOMING CALL DIS- PLAY” on page 195.) RX450h/350_Navi_U...
To transfer the call: Select “Handset Mode” to change from hands-free call to cellular phone call. Select “Handsfree Mode” to change from cellular phone call to hands-free call. To hang up the phone: Select press the switch on the steering wheel. RX450h/350_Navi_U...
Page 170
To hang up the phone: Select The operating procedure is similar to press the switch on the steering other voice recognition operations. (For wheel. the operation of voice recognition, see “VOICE COMMAND SYSTEM” on page 330.) RX450h/350_Navi_U...
Each time is selected or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched. RX450h/350_Navi_U...
Select “Stop” to stop the func- tion. Select “-” or “+”, turn the “PWR·VOL” knob, or use the volume switch on the steering wheel to adjust the message read out volume. The message read out function is available even while driving. RX450h/350_Navi_U...
Select “Send”. While the message is being sent, a sending message screen is displayed. This screen will be displayed if message delivery fails. Select “Retry” to attempt to send the mes- sage again or select “Cancel” to cancel. RX450h/350_Navi_U...
(See “MESSAGE SET- TINGS” on page 190.) For SMS/MMS, selecting pressing the switch on the steering wheel calls the sender. (See page 167.) To check the message later, select Select “OK” when editing is completed. “Ignore” or Select RX450h/350_Navi_U...
The call, transmit and ring tone volume can be adjusted. A ring tone can be se- lected. Select “Setup”. Select “Phone Sound Settings”. Select “Phone”. Perform each setting according to the procedures outlined on the following pages. When all settings are completed, select “Save”. RX450h/350_Navi_U...
Page 176
●The sound quality of the voice heard from the other party’ s speaker may be nega- tively impacted. RING TONE VOLUME SETTING Select “Ring Tone Volume” on the “Phone Sound Settings” screen. Select “-” or “+” to adjust the ring tone volume. Select “OK”. RX450h/350_Navi_U...
Perform each setting according to the procedures outlined on the following pages. procedures outlined on the following pages. INFORMATION ●Phonebook data is managed indepen- dently for every registered phone. When one phone is connected, another phone’ s registered data cannot be read. RX450h/350_Navi_U...
Page 178
Operation methods differ between Select “Options”. PBAP compatible and PBAP incompat- ® ible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the phonebook cannot be transferred. Select “Manage Contacts”. RX450h/350_Navi_U...
Page 179
Bluetooth phone. This operation may be unnecessary depending on the type of cellular phone. Depending on the type of cellular phone, OBEX authentication may be required when transferring phonebook data. Enter ® “1234” into the Bluetooth phone. RX450h/350_Navi_U...
Page 180
Contacts”. Select “On”. If the phonebook contains phonebook data, this screen is displayed. Select “Save”. INFORMATION ® ●Depending on the type of Bluetooth phone, the registered image on the phonebook may not appear when phonebook data is transferred. RX450h/350_Navi_U...
Page 181
Select from the “Setup” screen. “Done”. ® When another Bluetooth device is con- nected ® When another Bluetooth device is cur- rently connected, this screen is displayed. To disconnect it, select “Yes”. RX450h/350_Navi_U...
Page 182
“Phone # 1”, “Phone # 2” and “Phone # 3” separately. Phonebooks cannot be Input the phone number and select edited PBAP compatible “OK”. ® Bluetooth phones via the navigation system. To use a tone signal after the phone num- ber, input the tone signal too. RX450h/350_Navi_U...
Page 183
Select the desired data from the list on the “Contacts” screen. Select “Options”. Select the desired name or number. Select “Edit”. Edit the name or the number. (See “REGISTERING THE PHONEBOOK DATA” on page 182.) Select “Save” when editing is complet- RX450h/350_Navi_U...
Page 184
If “Update Contact” has been selected, this screen will be displayed. Select the Select the desired data or “Select All”, desired data from the list. then select “Delete”. Multiple data can be selected and deleted at the same time. Select “Yes”. RX450h/350_Navi_U...
Page 185
“Contacts” screen. Select “Options”. Perform each setting according to the procedures outlined on the following pages. Select “Delete”. Select “Yes”. INFORMATION ® ●When a Bluetooth phone is deleted, the phonebook data will be deleted at the same time. RX450h/350_Navi_U...
Page 186
Press the “MENU” button on the Remote Touch, then select “Phone”. The “Phone” screen can be displayed by pressing on the steering wheel. Select the desired data to be registered. Select “Contacts” on the “Phone” screen. Select “Options”. RX450h/350_Navi_U...
Page 187
If a location that is already in use is se- lected, this screen will be displayed. Select “Yes” to set new speed dial. Select “Yes” to replace it. Select the desired data to be registered. When this screen is displayed, the oper- ation is complete. RX450h/350_Navi_U...
Page 188
“Contacts” screen. Select “Options”. Select the desired data, or to delete all the data select “Select All”, then select “Delete”. Select “Set Speed Dial”. Multiple data can be selected and deleted at the same time. Select “Yes”. RX450h/350_Navi_U...
Page 189
Press the “MENU” button on the Remote Touch, then select “Phone”. The “Phone” screen can be displayed by pressing on the steering wheel. Select “Call History” on the “Phone” screen. Select “Delete”. Select the desired history to be deleted. RX450h/350_Navi_U...
Select “Phone” on the “Setup” screen. Select “Call History” on the “Phone” Select “Messaging Settings”. screen. Select the desired history to be deleted. Perform each setting according to the procedures outlined on the following pages. Select “Save” when each setting is com- pleted. RX450h/350_Navi_U...
Page 191
Select to edit quick reply messages. (See “EDIT QUICK REPLY MES- SAGES” on page 193.) To reset all setup items, select “Default”. INFORMATION ●Depending on the phone, these functions may not be available. On this screen, the following functions can be operated: RX450h/350_Navi_U...
Page 192
Select the desired new message notifi- sage notification volume. cation tone. New message notification tones can be Select “OK”. heard by selecting the screen buttons. INFORMATION Select “OK”. ●The system will automatically increase the volume when the speed exceeds 50 mph (80 km/h). RX450h/350_Navi_U...
Page 193
Select the screen button corresponding read out volume. to the desired message. Select “OK”. Use the software keyboard to edit the message. INFORMATION Select “OK”. ●The system will automatically increase the volume when the speed exceeds 50 mph (80 km/h). RX450h/350_Navi_U...
10.) Select “Setup” on the “Menu” screen. Select “Phone” on the “Setup” screen. Select “Phone Display Settings”. Select “Yes”. Perform each setting according to the procedures outlined on the following pages. When each setting is completed, select “Save”. RX450h/350_Navi_U...
Page 195
“Drop Down” screen and it can only be ●Depending on the phone, these functions operated via the steering may not be available even if the phone is wheel switches. PBAP compatible. Select “Save”. RX450h/350_Navi_U...
Page 196
The ori- entation of the image can be set. Select “Rotate Contact Images”. Select “Yes”. Select the desired orientation of the im- age to be displayed. Select “Save”. RX450h/350_Navi_U...
Select “Registered Devices”. Select “Setup”. Perform each setting according to the procedures outlined on the following Select “Bluetooth*”. pages. Perform each setting according to the *: Bluetooth is a registered trademark of procedures outlined on the following Bluetooth SIG, Inc. pages. RX450h/350_Navi_U...
Page 198
When this screen is displayed, operate When using the same device, it is not nec- ® the Bluetooth device. essary to register it again. When this screen is displayed, follow the guidance on the screen to try again. RX450h/350_Navi_U...
Page 199
Select the device to be deleted, then se- lect “Remove”. Select “Yes”. Multiple devices can be selected and deleted at the same time. Select “Yes”. INFORMATION ® ●When deleting a Bluetooth phone, the phonebook data will be deleted at the same time. RX450h/350_Navi_U...
Page 200
Depending on the type of phone, the phone number may not be displayed. “Profiles”: The compatibility profile of the ® Bluetooth device is displayed on the screen. “Connect Portable Player from”: There are 2 portable player connection settings avail- able; “Vehicle” and “Portable Player”. RX450h/350_Navi_U...
Page 201
“Portable Player”: Select to connect the portable player to the audio system. Depending on the portable player, the “Vehicle” or “Portable Player” connection method may be best. As such, refer to the manual that comes with the portable player. Select “OK”. RX450h/350_Navi_U...
Select “Setup” on the “Menu” screen. ® Bluetooth phone can be disconnected. Select “Yes” to disconnect. Select “Bluetooth*” on the “Setup” screen. This screen is displayed. Select “Connect Phone”. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Select “Connect Portable Player”. nected ® When another Bluetooth device is cur- rently connected, this screen is displayed. ® To disconnect the Bluetooth device, select “Yes”. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Page 204
® Bluetooth mark displayed on it. If the currently connected portable player’ s screen button is selected, the portable player can be disconnected. Select “Yes” to disconnect. This screen is displayed. RX450h/350_Navi_U...
269.) If it is desirable to change the settings, refer This screen is displayed. to the following pages. When the settings have been changed, select “Save”. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Page 206
The auto connection state cannot be device name and select “OK”. changed from “On” to “Off” while driving, but it can be changed from “Off” to “On”. Select “Bluetooth* Power”. Select “Save”. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Page 207
(See “CHANGING “Bluetooth* Pow- er”” on page 206.) Input a passcode and select “OK”. Select “Display Phone Status” or “Display Portable Player Status”. Select “Save”. Select “On”. Select “Save”. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Page 208
INITIALIZING THE Bluetooth SETTINGS The settings can be initialized. Select “Default”. Select “Yes”. If the state of “Bluetooth* Power” is ® changed from “Off” into “On”, Bluetooth connection will begin. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
IF THE PLAYER MALFUNCTIONS .... 253 USING HD Radio™ TECHNOLOGY..224 DVD PLAYER AND DVD VIDEO DISC INFORMATION........254 AVAILABLE HD Radio™ TECHNOLOGY..........225 8. USB MEMORY OPERATION ... 256 TROUBLESHOOTING GUIDE..... 227 CONNECTING A USB MEMORY..... 256 PLAYING A USB MEMORY ......257 RX450h/350_Navi_U...
Page 211
USING THE REMOTE CONTROLLER........... 282 SETUP CHANGING THE SOURCE ......282 CHANGING THE SPEAKER OUTPUT..283 1. AUDIO SETTINGS........312 OPERATION FROM THE FRONT SEATS ............ 284 HD Radio™ SYSTEM SETTINGS..... 312 USING THE RADIO..........285 iPod SETTINGS............313 5211 RX450h/350_Navi_U...
Using the Remote Touch Press the “MENU” button on the Remote Touch, then select “Radio” or “Media” to display the audio/video screen. If a Mark Levinson brand audio system is installed, the “Mark Levinson” logo is shown on the panel. RX450h/350_Navi_U...
Page 213
Press to display the media control screen. “RADIO” button Press to display the radio control screen. Press to turn the audio/video system on and off, “PWR·VOL” knob and turn to adjust the volume. “ ” button Press to eject a disc. RX450h/350_Navi_U...
●Laser products • USE CONTROL ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT HAZARDOUS RADIATION EXPOSURE. • THE OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. RX450h/350_Navi_U...
A function that enables automatic return to the previous screen from the audio/ video screen can be selected. See page The audio split screen can be displayed 53 for details. while the map screen is displayed. For details, see page 47. RX450h/350_Navi_U...
●The DVD player can be turned off by ejecting a disc. ●When radio or media mode is selected, the respective screen buttons are dis- played on the screen. ●Dimmed screen buttons cannot be oper- ated. RX450h/350_Navi_U...
LEVELIZER (ASL) Select the “Sound” tab to display this screen. The system adjusts to the optimum vol- ume and tone quality according to vehi- cle speed to compensate for increased vehicle noise. Select “Automatic Sound Levelizer”. Select “On” or “Off”. RX450h/350_Navi_U...
Press the “MENU” button on the cally and horizontally, by the same ra- Remote Touch and select “Media”. tio, to fill the screen. (Using the Remote Touch) When is selected, the previous Select the “DISC” tab. screen is displayed. Select “Save”. RX450h/350_Navi_U...
USB memory or iPod mode. For the Remote Touch operation method, see “SWITCHING BETWEEN FUNC- TIONS” on page 216. INFORMATION ●When a USB memory/iPod is not con- nected with the USB port, the tab will be dimmed. RX450h/350_Navi_U...
TIONS” on page 216. STEP UP AND DOWN THE STATION BAND Turn the knob clockwise to step up the station band or counterclockwise to To change the preset station to a different step down. one, follow the same procedure. RX450h/350_Navi_U...
10 seconds if “All” or “HD Only” is selected, or 5 seconds if “Analog” is selected, and then scan again. To stay tuned to a station and stop the scanning, se- lect “SCAN” again. (To set HD Radio™ system, see page 312.) RX450h/350_Navi_U...
Settings” are set to analog.) • Alert (Emergency Alert) Select “TYPE SEEK” and the system will start to seek for stations in the rele- vant program type. INFORMATION ●If no relevant program can be found, “no type” will appear on the screen. RX450h/350_Navi_U...
The song title, artist name and music genre will appear on the screen when available by the radio station. This screen will be displayed if “Options” is selected. RX450h/350_Navi_U...
Open the cover and connect iPod using an iPod cable. Each time “Multicast” is selected, the sup- plemental program changes. If “Multicast” is selected when tuned to the last of the supplemental programs, the main program will be returned to. RX450h/350_Navi_U...
Page 226
Close the console box. INFORMATION ●If tagging the music information fails, “Saving the HD Radio tag failed.” will be displayed on the screen. If this occurs, tag the information again. ●HD Radio™ stations can be preset. RX450h/350_Navi_U...
Complete the form; match the present song au- radio broadcaster. www.ibiquity.com/automotive/ dio. report_radio_station_experiences. Broadcaster should be notified. No text information shown Data service issue by the Complete the form; for the present selected fre- radio broadcaster. www.ibiquity.com/automotive/ quency. report_radio_station_experiences. RX450h/350_Navi_U...
Page 228
1. AUDIO/VIDEO SYSTEM OPERATION HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio ™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp. RX450h/350_Navi_U...
It is necessary to enter into a separate TECHNOLOGY NOTICE service agreement with XM Satellite Radio in order to receive satellite broad- Lexus’s satellite radio tuners are award- cast programming in the vehicle. Addi- ed Type Approval Certificates from XM tional...
TIONS” on page 216. Turn the “TUNE·SCROLL” knob to se- To change the preset channel to a different lect the next or previous channel. one, follow the same procedure. Turning the knob quickly allows rapid scrolling through the channel list. RX450h/350_Navi_U...
To scan the currently selected channel cat- egory: Select “SCAN”. “SCAN” appears on the screen. The radio will find the next channel in the same channel category, stay there for a few seconds, and then scan again. To select a channel, select “SCAN” again. RX450h/350_Navi_U...
Ck Antenna A short circuit occurs in the antenna or the surrounding antenna ca- ble. See a Lexus certified dealer for assistance. You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryption code. Contact XM Satellite Radio for subscription information.
Page 233
●This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Cet appareil est conforme au CNR-310 d’Industrie Canada. Son exploitation est autorisée sous réserve que l’appareil ne cause pas de brouillage préjudiciable. RX450h/350_Navi_U...
For the Remote Touch operation method, to by activating “Apps” from the “Informa- see “SWITCHING BETWEEN FUNC- tion” screen, the “Apps” tab will be TIONS” on page 216. dimmed. *: For details, refer to http://www.lexus.com/enform/ or call 1-800-255-3987. RX450h/350_Navi_U...
Insert a disc into the disc slot. INFORMATION ●Under extremely cold conditions, the screen may react slowly or operation sound may become louder. ●If a disc is inserted with the label facing down, it cannot be played. After insertion, the disc is automatically loaded. RX450h/350_Navi_U...
“ ” button of “PRST·TRACK” repeatedly until the desired track number appears on the screen. The player will start playing the selected track from the beginning. “TUNE·SCROLL” knob: Turn the knob clockwise or counterclockwise to skip to the desired track. RX450h/350_Navi_U...
Page 237
Select to move to the beginning of the name. “RPT” appears on the screen. When the track is finished, the player will automati- cally play it again. To cancel this function, select “RPT” again. RX450h/350_Navi_U...
ON THE AUDIO TOP SCREEN INFORMATION ●If a CD-TEXT disc is inserted, the title of the disc and track will be displayed. Up to 32 characters can be displayed. : Select to skip to the next or previous folder. RX450h/350_Navi_U...
Page 239
“ ” button of “PRST·TRACK” repeatedly until the desired file number appears on the screen. The player will start playing the se- lected file from the beginning. “TUNE·SCROLL” knob: Turn the knob clockwise or counterclockwise to skip to the desired file. RX450h/350_Navi_U...
Page 240
Select “RPT” while the file is playing. : If appears to the right of an item name, the complete name is too long for the screen. Select to scroll to the end of the name. Select to move to the beginning of the name. RX450h/350_Navi_U...
As such some functions may not work properly. Be sure to read the in- struction manual that comes with the in- dividual DVD disc. For detailed information about DVD video discs, see “DVD PLAYER AND DVD VIDEO DISC INFORMATION” on page 254. RX450h/350_Navi_U...
The screen mode can be changed. ing hazard. Keep this in mind when you If “Full Screen” is selected when the vehicle adjust the volume. is completely stopped and the parking brake is applied, the video screen returns. RX450h/350_Navi_U...
Page 243
Select to resume normal play during pause. Select to fast forward dur- ing playback and forward frame by frame during pause. ■ CHANGING A CHAPTER Press the “ ” or “ ” button of “PRST·TRACK” turn “TUNE·SCROLL” knob to change the chapter. RX450h/350_Navi_U...
Select to display the audio selection screen. Select to display the subtitle selection screen. Select to display the angle selection screen. Select to display the screen mode screen. Select to display the image quality adjustment screen. Select to display the initial setup screen. RX450h/350_Navi_U...
Page 245
Select “Angle” on the “DVD Options” screen. The languages available are restricted to those available on the DVD disc. When is selected, the previous screen is displayed. RX450h/350_Navi_U...
Page 246
OR AND TONE ADJUSTMENT any button on the audio panel or on the Select “Display” on the “DVD Options” Remote Touch. The selected screen appears. screen. Select “ ” or “ ” to display the desired item to be adjusted. RX450h/350_Navi_U...
Page 247
“Other” and enter a language code. For entry of a lan- guage code, see “ENTER AUDIO/SUBTI- TLE/MENU LANGUAGE CODE” on page 249. To return to the “DVD Settings” screen, select Select “Save” on the “DVD Settings” screen. RX450h/350_Navi_U...
Page 248
Select “Angle Mark” on the “DVD Set- Select “Auto Start Playback” on the tings” screen. “DVD Settings” screen. Select “On” or “Off”. Select “On” or “Off”. Select “Save” on the “DVD Settings” Select “Save” on the “DVD Settings” screen. screen. RX450h/350_Navi_U...
Page 249
Select “Save” on the “DVD Settings” Enter the 4-digit language code. screen. If the wrong numbers are entered, select to delete the numbers. To return to the “DVD Settings” screen, select Select “OK”. Select “Save” on the “DVD Settings” screen. RX450h/350_Navi_U...
If the malfunction is not rectified: Take Likewise, a rear passenger can cancel a front passenger’ s selection of the setup your vehicle to your Lexus dealer. menu. To lock the rear seat entertainment system, INFORMATION see “OPERATION FROM THE FRONT...
Even if the DVD video disc does not have a Standard: 4:3 region code, there are cases when it cannot be used. Indicates region code by which this vid- eo disc can be played. ALL: in all countries Number: region code RX450h/350_Navi_U...
Page 255
Laboratories. Dolby and the double-D • Level 2 - 7: DVD video discs for children symbol are trademarks of Dolby and G-rated movie can be played. Laboratories. • Level 8: All types of the DVD video discs can be played. RX450h/350_Navi_U...
●Do not insert foreign objects into the port as this may damage the portable player or its terminal. Turn on the power of the USB memory if it is not turned on. Close the console box. RX450h/350_Navi_U...
(and the contents have not been changed), the USB memory will resume playing from the same point it was last used. ●Depending on the USB memory that is connected to the system, certain func- tions may not be available. RX450h/350_Navi_U...
Page 258
: If appears to the right of an item name, the complete name is too long for the screen. Select to scroll to the end of the name. Select to move to the beginning of the name. RX450h/350_Navi_U...
Page 259
: If appears to the right of an item name, the complete name is too long for the screen. Select to scroll to the end of the name. Select to move to the beginning of the name. RX450h/350_Navi_U...
Page 260
REPEATING A FOLDER/ALBUM “RPT” Select repeatedly until “FLD.RPT” appears on the screen. When the folder/album is finished, the player will automatically go back to the beginning of the folder/album and play it again. To cancel this function, select “RPT” again. RX450h/350_Navi_U...
Page 261
ALL FOLDER/ALBUM RANDOM PLAY Select “RAND” repeatedly until “FLD.RAND” appears on the screen. Once “FLD.RAND”/“ALB.RAND” appears on the screen, the system selects a file randomly from all of the existing folders or albums. To cancel this function, select “RAND” again. RX450h/350_Navi_U...
Turn on the power of the iPod if it is not INFORMATION turned on. ●When an iPod is connected using a genu- Close the console box. ine iPod cable, the iPod starts charging its battery. RX450h/350_Navi_U...
“SWITCHING BETWEEN FUNC- Select “Browse”. TIONS” on page 216. : Select to start playing the music. : Select to pause the music. : Select to start playing the music again. Select “Video” to display the iPod video control screen. RX450h/350_Navi_U...
Page 264
Select to scroll to the end of the “TUNE·SCROLL” knob: Turn the knob name. Select to move to the beginning of clockwise or counterclockwise to skip to the name. the desired track. RX450h/350_Navi_U...
Page 265
To “RPT” appears on the screen. When the cancel this function, select “RAND” again. track is finished, the player will automati- cally play it again. To cancel this function, select “RPT” again. RX450h/350_Navi_U...
TIONS” on page 216. Select “Video” on the iPod top screen. SELECTING A VIDEO GROUP This screen is displayed. Select the album name screen button. Select “Music” to display the iPod top screen. Select the desired video group. RX450h/350_Navi_U...
Page 267
: If appears to the right of an item name, the complete name is too long for the screen. Select to scroll to the end of the name. Select to move to the beginning of the name. RX450h/350_Navi_U...
Page 268
1. AUDIO/VIDEO SYSTEM OPERATION ■FAST FORWARDING OR REWIND- Press and hold the “ ” or “ ” button of “PRST·TRACK” to fast forward or re- wind the player. When the button is released, the player resumes playing from that position. RX450h/350_Navi_U...
Bluetooth is a trademark owned by NOTICE Bluetooth SIG, Inc. ●Do not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the porta- ble player. RX450h/350_Navi_U...
Page 270
A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Recommended: Ver. 1.2 or higher) Empty Full AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Recommended: Ver. 1.4 or higher) ●Refer http://www.lexus.com/ ® MobileLink to find approved Bluetooth devices for this system. RX450h/350_Navi_U...
Bluetooth audio information from extremities: hands, wrists, feet and the system. (See “DELETING A ankles). ® Bluetooth DEVICE” on page 199.) ●Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. RX450h/350_Navi_U...
Page 272
(1) il ne doit pas produire de brouillage, et *: Bluetooth is a registered trademark of (2) l’utilisateur du dispositif doit être prêt Bluetooth SIG, Inc. à accepter tout brouillage radioélectrique reçu, même si ce brouillage susceptible compromettre le fonctionnement du dispositif. RX450h/350_Navi_U...
ON <IGNITION ON> mode. use the portable player. • When “Bluetooth* Power” is switched from off to on. • When the portable player is discon- nected for some reason. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
*: Bluetooth is a registered trademark of Depending on the portable player that is Bluetooth SIG, Inc. connected to the system, the music may start playing when selecting while it is paused. Conversely, the music may pause when selecting while it is playing. RX450h/350_Navi_U...
Page 275
Select the album name screen button to display the following playlist screen. Select the desired screen button. If the folder name screen button is selected, the track list screen is displayed. Select the desired track name screen button. RX450h/350_Navi_U...
Page 276
●Some titles may not be displayed ■ ON THE TRACK LIST SCREEN depending on the type of portable player. Select the track name screen button to display the following track list screen. RX450h/350_Navi_U...
Page 277
• Track Repeat Album Repeat “RPT” appears on the screen. When the track is finished, the player will automati- cally play it again. To cancel this function, select “RPT” repeatedly until the repeat mode turns off. RX450h/350_Navi_U...
Page 278
• Album Random All Track Random Once “RAND” appears on the screen, the system selects a track randomly from the album currently being listened to. To cancel this function, select “RAND” repeatedly until the random mode turns off. RX450h/350_Navi_U...
GINE START STOP”> switch is in ACCESSORY or ON <IGNITION ON> mode. Name Name Front audio/video system Power outlet Displays A/V input port Rear seat entertainment system con- Headphone volume control dials and troller headphone jacks *: If equipped RX450h/350_Navi_U...
Necessary item for replacing two AA 297. batteries. Remove the cover. REAR SEAT ENTERTAINMENT SYSTEM CONTROLLER Remove the depleted batteries and in- stall the new ones. BEFORE USING THE CONTROLLER (FOR NEW VEHICLE OWNERS) Remove the insulating sheet before us- ing the remote controller. RX450h/350_Navi_U...
●When using AA batteries catch signals properly. Lexus recommends • Batteries can be purchased at your the use of Lexus genuine wireless head- Lexus dealer, electric appliance shop, phones. or camera stores.
When switch is moved to “L”, operations Press the “SOURCE” button to display can be performed on the left screen. the audio source selection screen. Function Turning on the audio source selec- tion screen Selecting an icon Inputting the selected icon RX450h/350_Navi_U...
●Removed battery and other parts: • Keep away from children. These parts are small and if swallowed by a child they can cause choking. Failure to do so could result in death or serious injury. RX450h/350_Navi_U...
Turns the rear screen on or off. Locks the system so passengers in the rear seats cannot operate the rear entertainment system. Enables the front speakers to output the front audio/video system’s audio source. Select the desired button. The selected button indicator is highlighted. RX450h/350_Navi_U...
SELECTING A PRESET a station/channel of the nearest frequency. STATION/CHANNEL Press the “ ” or “ ” button of “FOL/ CH” until the desired station/channel band appears on the screen. RX450h/350_Navi_U...
262.) set. For details, refer to “APPS”. (See page 380.) Select iPod mode on the source screen to display the control screen. Select Apps mode on the source screen to display the control screen. RX450h/350_Navi_U...
Select USB mode on the source screen to display the control screen. Press the button repeatedly until the desired track number appears on the screen. FAST FORWARDING OR REWINDING Press and hold the button, or press and hold the but- ton. RX450h/350_Navi_U...
FAST FORWARDING OR REWINDING Press and hold the button, or press and hold the but- ton. INFORMATION ●Depending on the USB memory that is connected to the system, certain functions may not be available. RX450h/350_Navi_U...
●Depending on the portable player that is connected to the system, certain functions may not be available. FAST FORWARDING OR REWINDING A TRACK Press and hold the button, or press and hold the but- ton. PLAYING OR PAUSING A TRACK Press the button. RX450h/350_Navi_U...
CH” until the desired folder number ap- pears on the screen. Function FAST FORWARDING OR REWINDING A FILE Selecting an icon Press and hold the button, Turning on the DVD mode or press and hold the but- ton. Inputting the selected icon Playing/pausing a disc RX450h/350_Navi_U...
Page 291
INFORMATION tial setup screen. ●If appears on the screen when a control is selected, the operation relevant Select to display the an- to the control is not permitted. gle selection screen. Select to display the sub- title selection screen. RX450h/350_Navi_U...
Page 292
When the button is pressed, a chapter can be selected. If the wrong numbers are entered, select to delete the numbers. When is selected, the previous screen is displayed. When is selected, the previous screen is displayed. RX450h/350_Navi_U...
Page 293
After the initial setting has been changed, select “OK”. This screen will close, and the system will return to the previous screen. When “Default” is selected, all menus are initialized. RX450h/350_Navi_U...
Page 294
Select “ON” or “OFF”. guage code, see “ENTER AUDIO/SUBTI- Select “OK” on the “Setup Menu 1” TLE/DVD LANGUAGE CODE” on page screen. 295. To return to the “Setup Menu 1” screen, select Select “OK” on the “Setup Menu 1” screen. RX450h/350_Navi_U...
Page 295
Select “OK” on the “Setup Menu 1” screen. Select “Sound Dynamic Range” on the “Setup Menu 2” screen. Select “MAX”, “STD” or “MIN”. Select “OK” on the “Setup Menu 2” screen. RX450h/350_Navi_U...
Page 296
Eject the disc and allow the player to cool down. If “No music files found.” appears on the screen: It indicates that the iPod or USB has no playable data. If the malfunction is not rectified: Take your vehicle to your Lexus dealer. RX450h/350_Navi_U...
For details, refer to the manufac- turer’ s instructions. NOTICE ●When the A/V input port is not in use, keep the A/V input port cover closed. Inserting anything other than an appro- priate plug may cause electrical failure or a short circuit. RX450h/350_Navi_U...
Page 298
Automatically determines the tone of the video image and sets the contrast to an optimum level, displaying a sharp im- age. Press the “SETTING” button. ADJUSTING THE SCREEN Press the “SETTING” button. Select “LCD AI”. The “LCD AI” indicator is highlighted. RX450h/350_Navi_U...
Page 299
Select to weaken the “Tone” “-” tone of the screen. The screen goes off when “Screen Off” is selected. To turn the screen back on, press any remote control button. The selected screen appears. RX450h/350_Navi_U...
The volume continues to increase while the Repeat it until the desired folder is selected. switch is being pressed. Press the “-” side to decrease the volume. The volume continues to decrease while the switch is being pressed. RX450h/350_Navi_U...
Page 301
Press and hold the “ ” or “ ” switch until a beep is heard to change to the next or the previous folder or album. Re- peat it until the desired folder or album is se- lected. RX450h/350_Navi_U...
In addition, reception conditions change constantly as the ve- hicle moves. Here, some common reception prob- lems that probably do not indicate a problem with the radio are described. RX450h/350_Navi_U...
Apple Inc., especially metal objects, may adversely registered in the U.S. and other countries. affect the reception of XM Satellite Radio. Alternation or modifications carried out without appropriate authorization may invalidate the user’ s right to operate the equipment. RX450h/350_Navi_U...
CAUTION ●DVD players use an invisible laser beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player correctly. RX450h/350_Navi_U...
Page 305
Use only discs marked as shown above. The following products may not be playable on your player: • SACD • dts CD • Copy-protected CD • DVD audio • Video CD • DVD+R • DVD+RW Labeled discs • DVD-RAM Special shaped discs RX450h/350_Navi_U...
Remove discs from the players when not in patible CDs. use. Store them in their plastic cases away from moisture, heat and direct sunlight. RX450h/350_Navi_U...
Page 307
However, the start of of at least 128 kbps are recommended. playback may be delayed when using discs containing numerous levels of folders. For this reason, we recommend creating discs with no more than 2 levels of folders. RX450h/350_Navi_U...
Record with the correct format. (For details, contact the appropriate appli- cation manufacturers of the applications.) RX450h/350_Navi_U...
Page 309
WMA (Windows Media Audio) is an audio compression format developed ® Microsoft . It compresses files into a size smaller than that of MP3 files. The decod- ing formats for WMA files are Ver. 7, 8 and RX450h/350_Navi_U...
Page 310
For more information, see the any Gracenote Data to any third party. web page for the Gracenote Privacy YOU AGREE NOT TO USE OR Policy for the Gracenote service. EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, GRACENOTE SERVERS, EXCEPT EXPRESSLY PERMITTED HEREIN. RX450h/350_Navi_U...
Select the item to be set. Select “Audio”. Screen button Function Select to receive both ana- “All” log and digital broadcasts. Select to receive only digi- “HD Only” tal broadcasts. Select to receive only ana- “Analog” log broadcasts. Select “Save”. RX450h/350_Navi_U...
When the track currently being played has cover art data, it can be displayed. Press the “MENU” button on the Remote Touch. Select “Display Cover Art”. Select “Setup”. Select “On” or “Off”. After iPod setting has been changed, select “OK”. Select “Audio”. RX450h/350_Navi_U...
ADJUSTING THE POSITION OF AND OPENING AND CLOSING THE AIR OUTLETS ........... 324 WINDSHIELD WIPER DE-ICER....325 DEFOGGING THE REAR WINDOW AND OUTSIDE REAR VIEW MIRROR ........... 325 OUTSIDE TEMPERATURE DISPLAY ..326 AIR CONDITIONING SYSTEM OPERATING HINTS......... 327 RX450h/350_Navi_U...
1. AIR CONDITIONING SYSTEM OPERATION 1. QUICK REFERENCE Press the “MENU” button on the Remote Touch, then select “Climate” to display the air conditioning control screen. : Driver side temperature display : Outside temperature display : Passenger side temperature display : If equipped RX450h/350_Navi_U...
Page 317
Press to defog the rear window and outside rear side rear view mirror view mirrors. defogger button Windshield air flow Press to defog the windshield. button 319, “ OFF” button Press to turn the fan off. Press to use the automatic air conditioning sys- “AUTO” button tem. RX450h/350_Navi_U...
330 and 337. See page 53 for details. NOTICE ●To prevent the 12-volt battery from being discharged, do not leave the air condi- tioning system on longer than necessary when the hybrid system is off <the engine is not running.> RX450h/350_Navi_U...
Press the “AUTO” button. Using the screen Select “ ” to increase the temperature and “ ” to decrease the temperature. Press the “ OFF” button to turn the fan off. RX450h/350_Navi_U...
Using the screen driver’ s side and front passenger’ s side. Select “ ” on to increase the fan speed and “ ” to decrease the fan speed. (7 levels) Press the “ OFF” button to turn the fan off. RX450h/350_Navi_U...
Page 321
The outlets from which air is delivered can be selected manually. Press the air flow control button. Air flows to the upper body and feet (Bi- level) Using the screen Select any mode on the screen. Function Floor/windshield Bi-level Panel Floor RX450h/350_Navi_U...
Recirculated air mode “AUTO” mode Outside air mode The air conditioning system automatically switches between outside air and recircu- lated air modes. INFORMATION ●The setting in automatic mode can be adjusted. (See page 142 and “Owner’ s Manual”.) RX450h/350_Navi_U...
The differ- ence between the temperature of the outside air and that of the windshield can cause the outer surface of the wind- shield to fog up, blocking your vision. RX450h/350_Navi_U...
Direct air flow to the left or right, up or down Turn the knob to open or close the vent Front side outlets Function Direct air flow to the left or right, up or down Turn the knob to open or close the vent RX450h/350_Navi_U...
●If the temperature shows “--” or “E”, take battery to discharge, especially during stop-and-go driving. The defogger is not your vehicle to your Lexus dealer. designed to dry rain water or to melt snow. ●If the outside rear view mirrors are heavily coated with ice, use a spray de- icer before operating the system.
Settings for the electronic key and the ●Customization (vehicles with hybrid sys- corresponding door can be changed. tem) Contact your Lexus dealer. The air conditioning control restriction of ●Using the automatic mode Eco drive mode can be changed to the •...
Page 328
(For details, refer to “Owner’ s Manual”.) ●Customization • Settings can be changed. (For details, refer to “Owner’ s Manual”.) RX450h/350_Navi_U...
“<>” next to the commands. (See page 337.) For example: Say “Find nearby dining”, “Call John” etc. Saying “Help” prompts voice guidance to offer examples of commands and opera- tion methods. RX450h/350_Navi_U...
Page 331
“Voice Prompts” is towards the microphone. selected. This setting can also be changed on the “Voice Settings” screen. (See page 66.) ●When “Voice Prompts” is selected, voice recognition will be temporarily sus- pended. Press the talk switch again. RX450h/350_Navi_U...
Page 332
If a home address is not registered, voice guidance will say “Your home is not set. Please try again after setting a home location. ” and you will be prompted to enter a home address. (See page 112.) RX450h/350_Navi_U...
Page 333
If this occurs, say the full street name. For example, say “East Main Street” and “East Main Street” will be recognized. RX450h/350_Navi_U...
Page 334
The system starts playing music. to search for a track using a voice com- mand. In this situation, reduce the amount of music data in the USB memory or iPod and update the recognition data to enable searching by voice command. RX450h/350_Navi_U...
Call”, say “Main menu” while the “Short- Brown>. “Call <name> cut Menu” screen is being displayed. I need to call <Robert <type>” Then say “Use the phone” followed by Brown> at <Work> right saying desired number, e.g. away. “123456789”. RX450h/350_Navi_U...
INFORMATION ●Commands relating to operation of the audio/video and air conditioning systems can only be performed when the audio and air conditioning systems are turned ●Expanded voice commands can be rec- ognized when the “Shortcut Menu” screen is displayed. RX450h/350_Navi_U...
Enables setting a destination by saying the ad- “Enter an Address” dress. “Go Home” Displays the route to home. Connects Lexus Enform with Safety Connect “Call Destination Assist” — response center. “Destination by Phone Enables setting a destination by saying the —...
Page 338
Action Menu “Traffic” Displays the traffic incident list. “Weather” Displays weather information. “Sports Scores” Displays the sports list. “Stock Quotes” Displays the stocks list. “Fuel Prices” Displays the fuel prices list. “Lexus Insider” Displays the Lexus insider list. — RX450h/350_Navi_U...
Page 339
“iPod” Selects the iPod audio mode. “USB audio” Selects the USB audio mode. “Audio on” Turns the audio system on. “Audio off” Turns the audio system off. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. RX450h/350_Navi_U...
Page 340
●Commands that have a “ ” in the Shortcut Menu column can be recognized from the “Shortcut Menu” screen. ●Commands that have a “ ” in the Shortcut Menu column can only be recognized from the screen that they are displayed in. RX450h/350_Navi_U...
“Cancel”, or press and hold the on the steering wheel. To restart the Mobile Assistant for addi- tional commands, press the on the steering wheel. • Mobile Assistant can only be restarted after the system responds to a voice com- mand. RX450h/350_Navi_U...
Page 342
• When the roof or windows are open. • When passengers are talking while the Mobile Assistant is being used. • When the air conditioning system’ s fan speed is set high. • When the air conditioning vents are turned toward the microphone. RX450h/350_Navi_U...
Use the displayed average fuel consumption as a reference. Update the average fuel consumption by Select “Info/Apps”. selecting “Update” to measure the current fuel consumption again. Past record data can be deleted by select- ing “Clear”. RX450h/350_Navi_U...
Page 345
IGNITION ON mode. Use the Select “Fuel Consumption” on the “In- displayed average fuel consumption as a formation” screen. reference. This screen will be displayed. Function Average speed Elapsed time Cruising range Previous fuel consumption per minute Current fuel consumption per minute RX450h/350_Navi_U...
2. MAP DATABASE VERSION AND COVERAGE AREA MAP INFORMATION INFORMATION ●Map data updates are available for a fee. Contact your Lexus dealer for further Coverage areas and legal information information. can be displayed and map data can be ●The “Map Information” screen displays updated.
Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Cet appareil est conforme au CNR-310 d’Industrie Canada. Son exploitation est autorisée sous réserve que l’appareil ne cause pas de brouillage préjudiciable. RX450h/350_Navi_U...
XM Satellite Radio subscription. : Available via separate XM subscrip- INFORMATION tion(s). ●For further details about the service, con- tact your Lexus dealer. SUBSCRIPTION(S) ●XM Satellite Radio is responsible for all fees and services, which are subject to ®...
Page 349
1-877-515-3987 ter complimentary trial period; more infor- Canadian Customers mation is available at: Visit www.xmradio.ca or calling U.S.A. Customers 1-877-438-9677 Visit www.siriusxm.com or call 1-877-515-3987 Canadian Customers Visit www.xmradio.ca or call 1-877-438-9677 RX450h/350_Navi_U...
Page 350
Digital Voice Systems, Inc. Note: this applies to XM receivers only and not XM Ready devices. RX450h/350_Navi_U...
Press the “MENU” button on the Remote Touch. The “XM Sports” screen is displayed. The following operations can be per- formed: • Sports information can be received. (See page 352.) • XM Sports settings can be set. (See page 352.) Select “Info/Apps”. RX450h/350_Navi_U...
“Read All” to hear all available information for that team. Personalized XM Sports teams can also be input from the “Setup” screen. (See “XM SETTINGS” on page 368.) The selected information will be read out in its entirety. RX450h/350_Navi_U...
Page 353
Select the desired sporting league of the team. Select “Yes” to confirm or “No” to can- cel. Select the name of the desired team to be added from the list that appears. Select “Yes” to confirm or “No” to can- cel. RX450h/350_Navi_U...
Press the “MENU” button on the Remote Touch. The “XM Stocks” screen is displayed. The following operations can be per- formed: • Stock data can be received. (See page 355.) • XM Stocks setting can be set. (See page 355.) Select “Info/Apps”. RX450h/350_Navi_U...
The selected data will be read out in its pages. entirety. Stock data may be delayed by approxi- mately 20 minutes. Personalized XM Stocks settings can also be input from the “Setup” screen. (See “XM SETTINGS” on page 368.) RX450h/350_Navi_U...
Page 356
Select “Yes” to confirm or “No” to can- added and saved in the system for which cel. information will be received. Stocks must be input one at a time. To enter a stock, the symbol of the desired stock must be known. RX450h/350_Navi_U...
Select “XM Fuel Prices” on the “Infor- Select “Info/Apps”. mation” screen. Select the desired gas station from the list. Select “XM Fuel Prices”. The location of the selected gas station will be displayed on the map screen. The “Fuel Price” screen is displayed. RX450h/350_Navi_U...
If is selected, the registered phone number can be called. INFORMATION ●The information displayed is received via satellite radio. Depending on the time the information is received, the displayed information may not be up to date. RX450h/350_Navi_U...
Page 359
Select “Other” on the “Setup” screen. Select “XM Fuel Prices” on the “Other Settings” screen. Select “Fuel Type”. Select “Preferred Brand”. Select the desired fuel type. Select the preferred brand. “Premium”, “Midgrade”, “Regular” or Select “Save”. “Diesel” can be selected. Select “Save”. RX450h/350_Navi_U...
Page 360
Select the desired period. “Last 24 Hours”, “Last 2 Days” or “Show All” can be selected. If “Show All” is selected, information about gas stations which fuel prices are not pro- vided is also displayed on the list. Select “Save”. RX450h/350_Navi_U...
INFORMATION XM NavWeather™ SCREEN Press the “MENU” button on the Remote Touch. “Info.” When the city icon is selected, “Info.” is dis- played on the map screen. Selecting this screen button displays the “Forecast” screen. (See page 363.) RX450h/350_Navi_U...
Page 362
Weather icons and grids Inclement weather information is displayed on the map using weather icons and grids. Heavy fog Selecting an icon shows the related infor- mation at the top of the screen. Heavy freezing rain/ice Heavy snow Heavy rain RX450h/350_Navi_U...
Function Received time Daytime weather City name Nighttime weather Today’s date Maximum temperature Current weather Minimum temperature Current temperature Precipitation probability Today’s weather Tomorrow’s weather Day after tomorrow’s weather Observed time (Time elapsed since last update) Specified day’s weather RX450h/350_Navi_U...
“OK”: When this screen button is selected, the screen returns to the map of the current position. XM NavWeather™ INDICATOR When an XM NavWeather™ warning is issued within the vicinity, the XM NavWeather™ indicator will appear on the map screen. RX450h/350_Navi_U...
Warning” and “Show Free Flowing Traffic” Select “Traffic Incidents”. will not operate. (See page 366.) A list of current traffic incidents is displayed along with information on the incident’ s dis- tance and position relative to the vehicle. RX450h/350_Navi_U...
Guidance route traffic information is dis- ® played on the screen. Select “Detail” to XM NavTraffic information is dis- display detailed traffic event information. played on the map screen. On the map screen On the freeway information screen RX450h/350_Navi_U...
Page 367
(screen button*). Color Function ® *: Selecting the XM NavTraffic indicator will start voice guidance. Heavy congestion Yellow Moderate traffic Green Freely flowing traffic RX450h/350_Navi_U...
Press the “MENU” button on the Remote Touch. On this screen, the following functions can be performed: Function Page Select to set XM Sports. Select “Setup”. Select to set XM Stocks. Select to set XM Fuel Pric- Select “Other”. RX450h/350_Navi_U...
LEXUS ENFORM WITH SAFETY CONNECT LEXUS ENFORM WITH SAFETY LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW CONNECT OPERATION 1. FUNCTIONAL OVERVIEW....370 1. APPS ............380 ACTIVATING “APPS”......... 380 2. TYPE A: FUNCTION ACHIEVED LINKING “APPS” AND NAVIGATION BY USING A LOCAL FUNCTION ........383 CELLULAR PHONE......
Lexus Enform with Safety Connect is a feature that includes Apps, Destination Assist, eDestination, Lexus Insider, and Safety Connect. The functions included in Lexus Enform with Safety Connect are classified into the fol- lowing three types. Type A: Function achieved by using a cellular phone...
1. LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW 2. TYPE A: FUNCTION ACHIEVED BY USING A CELLULAR PHONE Of the functions included with Lexus Enform with Safety Connect, only Apps can be achieved by using a cellular phone. Apps is a service that enables the usable contents of a cellular phone to be displayed on and operated from the navigation screen.
Displays and sounds the usable contents from the contents pro- (“Apps”) viders via a cellular phone on the application player. Contents received, via a cellular phone, from the contents pro- Navigation system vider servers are displayed on the navigation screen. *: For known compatible phones, refer to http://www.lexus.com/MobileLink. RX450h/350_Navi_U...
1. LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW INITIALIZING PERSONAL BEFORE USING THE DATA FUNCTION The personal data used in “Apps” can be SUBSCRIPTION reset. (See “DELETING PERSONAL DATA” on page 63.) Apps will be available on a trial period included upon purchase of a new vehicle.
1. LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW USER REGISTRATION PREPARATION BEFORE USING APPS When purchasing the vehicle, an email address is registered at your Lexus deal- SETTINGS REQUIRED TO USE er. If your email address was not regis- APPS tered at your Lexus dealer, your email address can be registered at the Lexus Perform the settings in the following order.
1. LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW REGISTERING THE APPS APPLICATION Download the Apps application to your cellular phone. Run the Apps application on your cellu- lar phone. Enter the information required into the Apps application. Login to the applica- tion.
3. TYPE B: FUNCTION ACHIEVED BY USING DCM AND THE NAVIGATION SYSTEM Of the functions included with Lexus Enform with Safety Connect, Destination Assist, eDestination, and Lexus Insider can be achieved by making DCM cooperate with the navigation system. These are subscription-based telematics services that use Global Positioning System (GPS) data, embedded cellular technology to provide safety and security as well as convenience features to subscribers.
(2) this device must accept any available in the contiguous United States. interference received, including Lexus Insider is available in the contiguous interference that may cause undesired 48 states and Canada. operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s...
1-800-255-3987 and relevant scientific literature. Over 120 follow the prompt for Lexus Enform with scientists, engineers, and physicians from Safety Connect. universities, government health agen- ●For further details about the service, con-...
1. LEXUS ENFORM WITH SAFETY CONNECT-OVERVIEW 4. TYPE C: FUNCTION ACHIEVED BY USING DCM Of the functions included with Lexus Enform with Safety Connect, Safety Connect can be achieved by using DCM. For details, refer to “Owner’s Manual”. RX450h/350_Navi_U...
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION 1. APPS Select “Apps”. ACTIVATING “APPS” Each time “Apps” is activated, the sys- tem checks for updates. When there are no updates available, the main menu screen will be displayed right after a screen indicating that updates are being checked for has been displayed.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION A screen indicating that an update is in When updating is complete, the main progress will be displayed. menu screen will be displayed. To stop updating, select “Cancel”. The screen shown above is only an exam- ple.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION IF A MESSAGE APPEARS ON THE SCREEN When problems occur starting up the application player, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested cor- rective action.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION A screen indicating that updates are be- LINKING “APPS” AND ing checked for will be displayed. NAVIGATION LOCAL FUNCTION The navigation system’s setting a desti- nation and making a hands-free call can be performed via “Apps”.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION SETTING A DESTINATION MAKING A PHONE CALL USING “APPS” USING “APPS” Locations that were searched using Phone calls can be made to locations “Apps” can be set as a destination. which were searched using “Apps”.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION Input characters will be reflected on the INPUTTING KEYWORD character input space. OPERATION A keyword can be input to “Apps” by the software keyboard or voice recognition function. The keyboard layout can be changed.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION When this screen is displayed, say the desired keyword. Completion of saying the keyword will be detected automatically. Search results will be displayed on the screen. The screen shown above is only an exam- ple.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION 2. Destination Assist Destination Assist provides you with live MAKE A CALL WITH assistance for finding destinations via the Destination Assist Lexus Enform with Safety Connect re- sponse center. You can request either a Press the “MENU”...
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION When an agent comes on the line, tell After the agent helps you determine the agent the address, business name, your location of choice, this screen is or the type of POI or service you would displayed.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION 3. eDestination With the eDestination feature, you can DOWNLOAD eDestinations go online, via the Lexus.com owner’s Web site, to select and organize desti- After updating eDestination folders on- nations of your choice and then wire- line, the information to update the data in lessly send them to your vehicle’s...
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION Select “eDestination”. RETRIEVE AN eDestination Press the “MENU” button on the Remote Touch. (See “Remote Touch” on page 10.) Select “Destination” on the “Menu” screen. Select “Point of Interest” on the “Desti- The “eDestination” screen is displayed.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION Select the desired location. SHOW eDestination ICONS Select “Show on Map”. Select the button of the screen for the appropriate action. Select “eDestination Icons”. “Mark”: Select to mark the POI on the navigation map.
When “Read All” is selected, “Stop” is dis- played. To stop listening to the broadcast, select “Stop”. To disrupt the audio read of Lexus Insider, press the “MODE” switch on the steering wheel, or press the “RADIO” or “MEDIA”...
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION ABOUT ICONS DOWNLOAD A POI Icons appear at the left of the Lexus Insider Some Lexus Insider stories will contain a story titles and indicate the following: downloadable POI relevant to the con- tent.
NEW MESSAGE NOTIFICATION Select “Delete”. When the vehicle is first powered on and a new Lexus Insider article is available, a notification will appear on the navigation screen. The notice will appear for only approxi- mately 6 seconds unless one of the op- tions listed is selected.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION Select “LEXUS Insider”. Lexus Insider SETTINGS To change Lexus Insider settings, notifi- cation, and opt in or out of article re- ceipt. Press the “MENU” button on the Remote Touch. This screen is displayed.
2. LEXUS ENFORM WITH SAFETY CONNECT OPERATION RECEIVE/OPT OUT OF Lexus RESTORE THE DEFAULT Lexus Insider Insider SETTINGS Select “Receive LEXUS Insider”. Select “Default”. Select “Yes” to receive Lexus Insider ar- ticles or “No” to opt out of receiving ar- ticles.
KNOW............. 402 FAILURE WARNING ........409 IF YOU THINK SOMETHING IS CERTIFICATION........... 409 WRONG..............402 2. INTUITIVE PARKING ASSIST SETTING........410 SETTING AN ALERT VOLUME...... 410 SETTING A PARKING SONAR DISPLAY..............411 SETTING A DISPLAY AND TONE INDICATION............411 RX450h/350_Navi_U...
If you do not, you may hit another vehicle, and could possibly cause an accident. Pay attention to the following precau- tions when using the rear view monitor system. RX450h/350_Navi_U...
When the shift lever is shifted to the “R” position and any mode button (such as the “MAP/VOICE” button on the Remote Touch) is pressed The rear view monitor system is canceled, and the screen is switched to the mode of the button that was pressed. RX450h/350_Navi_U...
●Items which are located higher than the camera may not be displayed on the monitor. Screen Corners of bumper The image adjustment procedure for the rear view monitor system screen is the same as the procedure for adjusting the navigation screen. (See page 39.) RX450h/350_Navi_U...
If the lens is extremely dirty, wash ●Do not expose the camera to strong it with a mild cleanser and rinse. impact as this could cause a malfunction. If this happens, have the vehicle inspected by your Lexus dealer as soon as possible. RX450h/350_Navi_U...
IF YOU THINK SOMETHING IS WRONG If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Lexus dealer. Symptom...
Page 403
(smear effect). Bright spot The image is out of alignment The camera or surrounding Have the vehicle inspected by area has received a strong im- your Lexus dealer. pact. RX450h/350_Navi_U...
2. INTUITIVE PARKING ASSIST 1. INTUITIVE PARKING ASSIST The distance to obstacles measured by SETTING THE INTUITIVE the sensors is communicated via the dis- PARKING ASSIST MODE play and a buzzer when parallel parking or maneuvering into a garage. Always Press the menu switch.
2. INTUITIVE PARKING ASSIST ■ NAVIGATION DISPLAY DISPLAY When the vehicle is moving forward The graphic is automatically displayed When the sensors detect an obstacle, when an obstacle is detected. The screen the graphic is shown on the multi-infor- can be set so that the graphic is not dis- mation display and navigation display played.
2. INTUITIVE PARKING ASSIST THE DISTANCE DISPLAY AND BUZZER When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds. ■ CORNER SENSORS Level Display example Buzzer Medium Fast Continuous...
The range of the sensors may change In harsh sunlight or intense cold weather. depending on the shape of the object etc. A non-genuine Lexus suspension (lowered suspension etc.) is installed. In addition to the examples above, there...
Page 408
●As the intuitive parking assist-sensor • Tall obstacles with upper sections project- might be malfunctioning in the following ing outwards in the direction of your vehi- cases, have it checked by your Lexus dealer. • The graphic which indicates that an CAUTION...
If this message appears, have the intuitive • Turning off the main switch for the intui- parking assist-sensor checked by your tive parking assist-sensor Lexus dealer. WHEN SNOWFLAKES OR CERTIFICATION MUD GETS ON THE SENSORS For vehicles sold in Canada.
Select “Setup”. Press the “MENU” button on the Remote Touch, then select “Setup”. Select “Vehicle” on the “Setup” screen. Select “LEXUS Park Assist” on the “Vehicle Settings” screen. Select the desired screen button. Select “Vehicle”. The volume has 5 levels, increasing with higher value.
Remote Touch, then select “Setup”. Remote Touch, then select “Setup”. Select “Vehicle” on the “Setup” screen. Select “Vehicle” on the “Setup” screen. Select “LEXUS Park Assist” on the Select “LEXUS Park Assist” on the “Vehicle Settings” screen. “Vehicle Settings” screen.
ALPHABETICAL INDEX A/C ..............316, 327 Basic function.............. 32 ® Adding destinations..........100 Bluetooth ..............148 ® Air conditioning system ........319 Bluetooth audio........... 269 ® Air flow control buttons ......316, 321 Connecting a Bluetooth audio player............ 273 Air intake control button ......316, 322 ®...
Page 415
® Call on the Bluetooth phone ......161 Deleting destinations ..........101 By call history............163 Deleting personal data..........63 By dial ............... 161 Deleting previous destinations ......125 By phonebook............161 Deleting set destinations ........88 By POI call............. 167 Destination Assist..........
Page 416
ALPHABETICAL INDEX Detailed navigation settings........ 127 Detour setting ............102 eDestination ............389 Dial................. 165 Download eDestinations ......389 Disc slot ............... 212 Retrieve an eDestination ......390 Distance and time to destination......99 Show eDestination icons......... 391 Driver’s side temperature Eject button..............
Page 417
General settings............52 Keyboard layout............58 GPS (Global Positioning System)..... 12, 144 Language..............56 HD Radio™.............. 224 Lexus Enform with Safety Connect ....370 Heading-up screen............ 51 Preparation before using Apps....374 Home ..............14, 19, 112 Lexus Insider............. 392 Lexus Insider settings........
Page 418
ALPHABETICAL INDEX Map .................. 41 Natural speech information....... 335 Map database information and updates..424 Navigation settings............ 111 Map database version and Navigation system ............ 70 coverage area............ 346 North-up screen............51 Map icons ..............51 Map scale..............49 Map screen ..............12 Operation flow: guiding the route ......
Page 419
Passenger’s side temperature Quick guide..............10 control buttons........... 316, 319 Pausing guidance ........... 106 Phone (hands-free system for Radio................221 cellular phone) ............ 150 Listening to the radio ........221 Using the phone switch........151 Presetting a station ..........221 Using the steering switches......
Page 420
ALPHABETICAL INDEX Rear view monitor system........398 Rear window and outside rear view Satellite radio (SAT)........216, 229 mirror defogger button......316, 325 Screen adjustment............ 39 ® Receive on the Bluetooth phone....168 Screen Off..........40, 246, 298 ® Register a Bluetooth phone ......
Page 421
® Talk on the Bluetooth phone ......169 USB memory............256 Incoming call waiting.......... 171 Connecting a USB memory ......256 Tire change calibration.......... 134 Playing a USB memory........257 Tone................246 USB port ..............220 Tone and balance ............ 217 Traffic incidents............
Page 422
ALPHABETICAL INDEX XM Satellite Radio broadcast ......229 Channel category..........230 Windshield air flow button....... 316, 323 Displaying the radio ID ........229 WMA........238, 290, 306, 309 Displaying the title and name......231 How to subscribe to an XM Satellite Radio ........229 XM Fuel Prices............
Page 423
Zoom in button ............12 Zoom out button............12...
Page 432
University of California. All rights 1994 The Regents of the University of reserved. This code is derived from California. All rights reserved. software contributed to Berkeley by the Systems Programming Group of the University of Utah Computer Science Department and Ralph Campbell. RX450h/350_Navi_U...
Page 435
SOFTWARE, EVEN IF ADVISED OF 4. Neither the name of the University POSSIBILITY SUCH nor the names of its contributors may be DAMAGE. used to endorse or promote products derived from this software without specific prior written permission. RX450h/350_Navi_U...
Page 436
RESULTING FROM LOSS OF USE, WAY OUT OF THE USE OF THIS DATA OR PROFITS, WHETHER IN SOFTWARE, EVEN IF ADVISED OF AN ACTION OF CONTRACT, POSSIBILITY SUCH NEGLIGENCE OTHER DAMAGE. TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH PERFORMANCE THIS SOFTWARE. RX450h/350_Navi_U...
Page 437
OR OTHERWISE) ARISING IN ANY used to endorse or promote products WAY OUT OF THE USE OF THIS derived from this software without SOFTWARE, EVEN IF ADVISED OF specific prior written permission. POSSIBILITY SUCH DAMAGE. RX450h/350_Navi_U...
Page 441
CONTRACT, STRICT LIABILITY, OR used to endorse or promote products TORT (INCLUDING NEGLIGENCE derived from this software without OR OTHERWISE) ARISING IN ANY specific prior written permission. WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF POSSIBILITY SUCH DAMAGE. RX450h/350_Navi_U...
Page 442
CAUSED AND ON ANY THEORY specific prior written permission. LIABILITY, WHETHER CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF POSSIBILITY SUCH DAMAGE. RX450h/350_Navi_U...
Page 444
School of Computer Science Carnegie Mellon University Pittsburgh PA 15213-3890 any improvements or extensions that they make and grant Carnegie the rights to redistribute these changes. · TCP/IP, Socket Library This product includes software developed by the University of California, Berkeley contributors. RX450h/350_Navi_U...
Page 446
1997, and 1998 WIDE Project. All appear in all copies, and that the name rights reserved. of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the document or software without specific, written prior permission. RX450h/350_Navi_U...
Page 449
FOR A PARTICULAR PURPOSE. Rights, responsibilities and use of this software are controlled by the agreement found in the ““LICENSE.H”” file distributed with this source code. ““LICENSE.H”” may not be removed from this distribution, modified, enhanced nor references to it omitted. RX450h/350_Navi_U...
Page 450
“OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. Redistributions form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)” RX450h/350_Navi_U...
Page 452
SOFTWARE, EVEN IF ADVISED OF POSSIBILITY SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied under another distribution licence [including the GNU Public Licence. RX450h/350_Navi_U...
Need help?
Do you have a question about the RX450H and is the answer not in the manual?
Questions and answers
How do I change the color on my 2022 Lexus 450H navigation GPS. Mine is set on grey and I do not like it. I cannot find the map color customization. Thank you.
To change the map color on the 2022 Lexus RX450h navigation GPS, go to the map display settings and adjust the color under the map display options. Specific steps are not detailed, but this setting is part of the map display customization features.
This answer is automatically generated
How do I use the navigation system on my 2017 Lexus RX 450H ? Is a subscriptions required to use it How much ?