Table of Contents
Advertisement
When installing in the rear out-
■
board seats
If the child restraint system on hand is
not within the "universal" category (or
the necessary information is not in the
table), refer to the "Vehicle List" pro-
vided by the child restraint system
maker for various possible installation
positions, or check the compatibility
after asking the retailer of the child
restraint system. (P.45)
1
Adjust the seat.
If there is a gap between the child seat and
the seatback, adjust the seatback angle
until good contact is achieved.
2
Remove the head restraint if it inter-
feres with your child restraint sys-
tem. (P.138)
If the head restraint cannot be removed,
raise it to the uppermost position.
3
Widen the gap between the seat
cushion and seatback slightly.
1-2. Child safety
With flexible lower attachments
4
Latch the hooks of the lower
attachments onto the lower
anchorages.
59
1
Advertisement
Table of Contents
