Table of Contents
Advertisement
Vehicles without a head-up display
1
Increase set vehicle speed
2
Decrease set vehicle speed
Vehicles with a head-up display
1
Increase set vehicle speed
2
Decrease set vehicle speed
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
Short press adjustment: Increases or
decreases by 1 mph (1.6 km/h) each time
the switch is pressed
Long press adjustment: Increases or
decreases in 1 mph (1.6 km/h) increments
continuously while the switch is pressed
and held
Increasing the set vehicle speed
using the accelerator pedal
4-5. Using the driving support systems
1
Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2
Press the "+" switch.
Canceling/resuming control
Vehicles without a head-up display
Vehicles with a head-up display
1
Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
(If the vehicle has been stopped by system
control, depressing the brake pedal will not
cancel control.)
2
Press the "RES" switch to resume
control.
Changing the vehicle-to-vehicle
distance
Each time the switch is pressed, the
277
4
Advertisement
Table of Contents
