Table of Contents
Advertisement
124
3-2. Opening, closing and locking the doors
NOTICE
Do not paint the rear bumper.
●
●
If a bicycle carrier or similar heavy
object is attached to the power back
door, disable the Hands Free Power
Back Door (kick sensor).
Canceling the power back door
system
The power back door system can be
enabled/disabled on the center display.
(P.543)
1
Select
on the center display.
2
Select "Vehicle customize".
3
Select "Door control".
4
Select "Power back door".
5
Select
(ON)/
(OFF).
When OFF is selected and the operations
of the power back door is made to stop
from the center display, unless it is set to
ON, the operation of the power back door
will not return. (No return in the engine
switch operation)
Canceling the Hands Free
Power Back Door (if equipped)
The Hands Free Power Back Door
(kick sensor) can be enabled/disabled
on the center display. (P.543)
1
Select
on the center display.
2
Select "Vehicle customize".
3
Select "Door control".
4
Select "Hands free".
5
Select
(ON)/
(OFF).
When OFF is selected and the operations
of the Hands Free Power Back Door is
made to stop from the center display,
unless it is set to ON, the operation of the
Hands Free Power Back Door will not
return. (No return in the engine switch
operation)
Adjusting the open position of
the power back door
The open position of the power back-
door can be adjusted.
1
Stop the power back door at the
desired position. (P.112)
2
Press and hold the
the lower part of the power back
door for 2 seconds.
When setting is complete, a buzzer
will sound 4 times.
The next time the power back door
is opened, it will stop at that position.
■
Returning the power back door opening
position to the default setting
Press and hold the
lower part of the power back door for 7
seconds.
After the buzzer sounds 4 times, it sounds
switch on
switch on the
Advertisement
Table of Contents
