Lexus RX350 2023 Manual page 515

connect a negative cable clamp to
clamp at the other end of the negative cable to
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
5
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the battery of your vehi-
cle.
6
Open and close any of the doors of
your vehicle with the engine switch
off.
7
Maintain the engine speed of the
second vehicle and start the engine
of your vehicle by turning the
engine switch to ON.
8
Once the vehicle's engine has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
7-2. Steps to take in an emergency
on the second vehicle and connect the
C
.
D
Once the engine starts, have the vehi-
cle inspected at your Lexus dealer as
soon as possible.
■ Starting the engine when the battery is
discharged
The engine cannot be started by push-start-
ing.
■ If the doors cannot be unlocked using
the smart access system with push-but-
ton start or wireless remote control
The doors can be opened by enabling its
respective manual release handle opera-
tion. (P.513)
■ Locking the doors after the battery was
discharged
The doors cannot be locked using the smart
access system with push-button start or
wireless remote control.
By locking the door using the mechanical
key, the operation of the manual release
515
7