Lexus RX350 2023 Manual page 235

Table of Contents

Advertisement

• Roads with changes in grade, such as
sudden inclines or declines
• Roads which is sloped to the left or right
• Roads with deep ruts
• Roads which are rough and unmain-
tained
• Roads which frequently undulate or are
bumpy
When the steering wheel is being oper-
ated frequently or suddenly
When the vehicle is not in a constant
position within a lane
When parts related to this system, the
brakes, etc. are cold or extremely hot,
wet, etc.
When the wheels are misaligned
When driving on slick road surfaces, such
as when it is covered with ice, snow,
gravel, etc.
When the course of the vehicle differs
from the shape of a curve
When the vehicle speed is excessively
high when entering a curve
When entering/exiting a parking lot,
garage, car elevator, etc.
When driving in a parking lot
When driving through an area where
there are obstructions which may contact
your vehicle, such as tall grass, tree
branches, a curtain, etc.
When driving in strong wind
Situations in which the lane may not be
detected
When the lane is extremely wide or nar-
row
Immediately after changing lanes or
passing through an intersection
When driving in a temporary lane or lane
regulated by construction
When there are structures, patterns,
shadows which are similar to lane lines in
the surrounding
When there are multiple white lines for a
lane line
When the lane lines are not clear or driv-
ing on a wet road surface
4-5. Using the driving support systems
When a lane line is on a curb
When driving on a bright, reflective road
surface, such as concrete
Situations in which some or all of the
functions of the system cannot operate
When a malfunction is detected in this
system or a related system, such as the
brakes, steering, etc.
When the VSC, TRAC, or other safety
related system is operating
When the VSC, TRAC, or other safety
related system is off
Changes in brake operation sound and
pedal response
When the brakes have been operated,
brake operation sounds may be heard
and the brake pedal response may
change, but this does not indicate a mal-
function.
When the system is operating, the brake
pedal may feel stiffer than expected or
sink. In either situation the brake pedal
can be depressed further. Further
depress the brake pedal as necessary.
Situations in which the driver monitor
may not operate properly (if equipped)
In situations such as the following, the driver
monitor camera may not be able to detect
the driver's face, and the function may not
operate properly.
When the inside of the vehicle is hot, such
as after the vehicle has been parked in
the sun
When a very bright light, such as the sun
or the headlights of following vehicle,
shines onto the driver monitor camera
When the brightness inside the vehicle
changes frequently due to the shadows of
surrounding structures, etc.
When a very bright light, such as the sun
or the headlights of an oncoming vehicle,
is shining onto the driver's face
When light, either inside or outside of the
vehicle, is being reflected from the lenses
of eyeglasses or sunglasses
When there are multiple faces in the
detection range of the driver monitor
235
4

Advertisement

Table of Contents
loading

Table of Contents