Table of Contents
Advertisement
Power back door operating conditions
■
If the following conditions are met with the
power back door operation enabled, the
power back door can be opened and
closed automatically.
●
When an electronic key is being carried
and the back door opener switch is
*
pressed
When the wireless remote control is
●
*
used
●
When the engine switch is in ON, the
vehicle speed must be lower than 2 mph
(3 km/h) and one of the following condi-
tions must be met in addition to the above
conditions:
• The parking brake is engaged.
• The brake pedal is depressed.
• The shift position is in P.
*
: When the operation of the power back
door when it is locked has been disabled
by a customized setting, operate the
power back door after it has been
unlocked.
■
Operation of the power back door
●
When the power back door begins to
operate, the emergency flashers will flash
and a buzzer will sound.
When the power back door is disabled,
●
the power back door will not operate but
can be opened and closed manually.
●
The power back door turns to manual
operation when the back door opener
switch is pressed while the power back
door is in an automatic opening/closing
operation.
If anything obstructs the power back
●
door while opening, a buzzer will sound
and the power back door will stop imme-
diately. If anything obstructs the power
back door while closing, a buzzer will
sound and the power back door will auto-
matically move slightly in the opposite
direction and then stop.
■
Jam protection function
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
3-2. Opening, closing and locking the doors
sors are pushed due to an object being
caught, etc., the jam protection function will
operate.
From that position the door will automati-
cally move a little in the opposite direction
and then the function will stop.
Fall-down protection function
■
While the power back door is opening
automatically, applying excessive force to it
will stop the opening operation to prevent
the power back door from suddenly shut-
ting.
Back door closing assist
■
If the back door is lowered manually when
the back door is stopped at an open posi-
tion, the back door will fully close automati-
cally.
■
Back door reserve lock function
This function reserves the locking of the
power back door when the power back
door is open. If the following operations are
performed, all of the doors except the
power back door will lock and then the
power back door will lock when it is com-
pletely closed.
1
Close all of the doors, except the power
back door.
2
Perform an automatic closing operation
of the power back door and lock the
doors using the wireless remote control
(P.101) or smart access system with
push-button start (P.105) while the
power back door is closing.
Operation signals will indicate that all the-
doors have been closed and locked.
(P.106)
●
If the electronic key is placed inside the
vehicle after starting a close operation via
the door reserve lock function, the elec-
tronic key may become locked inside the
vehicle.
117
3
Advertisement
Table of Contents
