Kane Link - Adding Devices - Kane KANE988 Manual

KANE
DATA TRANSFER
You can wirelessly connect optional KANE LINK devices to your analyser.
Navigate to MANAGE LINK DEVICES in SETUP MENU - see page 19.
To wirelessly transfer data to a connected smart device running our KANE
LIVE App, select App using
To ADD, REMOVE and check STATUS of optional KANE LINK device select
LINK using &
WPCP2 WIRELESS PIPE CLAMP
To add select then enter serial number using
Enter serial number using
be 10 digits long.
If longer use the last 10 digits, e.g, enter serial number below using last 10
digits: 2105094301
DTHA2 ANEMOMETER
To add your DTHA2 anemometer select DTHA2 using
Enter serial number using
be 10 digits long.
If shorter enter 0's to make up to 10 - For example: Enter serial number
2001228 below as 0002001228.
Other KANE LINK devices can be paired - Contact KANE for more details
LINK WIRELESS MEASUREMENT AND
buttons.
&
&
&
buttons - Each clamp serial number must
buttons - Each serial number must
buttons.
& buttons.
KANE988 MANUAL 37