Kane Link - Kane KANE958 Manual

KANE LINK WIRELESS MEASUREMENT AND
DATA TRANSFER
You can wirelessly connect optional KANE LINK devices to your analyser.
Rotate dial to KANE LINK on your analyser to manage how your analyser
communicates with wireless devices.
To wirelessly transfer data to a connected smart device running our KANE
APPS, select APP using
To ADD, REMOVE and check STATUS of optional KANE LINE device select
LINK using & buttons.
WPCP2 WIRELESS PIPE CLAMP
To add select it then enter its serial number using & buttons.
Enter its serial number using & buttons. Each clamp serial number
must be 10 digits long.
If longer use the last 10 digits, e.g, in this example only enter last 10 digits:
2105094301
DTHA2 ANEMOMETER
To add a DTHA2 anemometer select DTHA2 using & buttons.
Enter its serial number using & buttons. Each serial number must
be 10 digits long.
If shorter enter 0's to make up to 10 e.g in this example enter 2001228 as
0002001228.
Other KANE LINK devices can be paired - Contact KANE for more details
26 KANE958 MANUAL