Avaya J189 Instructions Manual page 75

Before you begin
1
Ensure that your administrator activates the no hold conference feature and feature target
2
selection.
3
Ensure that you are on a call.
4
Procedure
5
1. During an active call, on the phone screen, press Main menu > Features.
6
2. Press No Hold Conference.
7
Select a destination dialogue box is displayed.
8
3. You can add users to a no hold conference by using one of the following methods:
9
• If an extension number is pre-configured by your administrator, you can press Select.
10
• If the extension number is not pre-configured, press the Dial soft key to use the dialpad
11
and manually enter the extension number, press OK.
12
• Press Contacts, Recents or Phone button to select the number from the list.
13
• Press the Browser soft key to select the destination number from the browser
14
application.
15
• Press the Autodial, Busy indicator or Team line key to select the number as
16
destination target.
17
The no hold conference feature is activated.
18
4. To add more participants to the existing no hold conference, repeat Steps 2 and 3.
19
Note:
You can press the Cancel soft key to terminate the no hold conference.
20
5. Press Enter or OK to activate the feature in case of manual dialling.
21
Related links
22
Handling calls and conferences using Multiple Device Access
23
Multiple Device Access
24
Dropping or Disconnecting the last participant from a conference call
25
Selecting a destination number using feature target
26
October 2022
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
on page 105
Using Avaya J189 SIP IP Phone in Avaya Aura
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)
on page 106
on page 73
on page 91
®
No Hold Conference
75