Connecting To A Wi-Fi Network - Avaya J189 Instructions Manual

• Left arrow key
1
6. Press one of the following:
2
• Save
3
• OK
4
Note:
If you do not want your phone to restart and stay in the Manual mode when you switch
5
Network config from Auto to Manual, press Save.
6
If you switch Network config from Manual to Auto, press Save and then do either of
7
the following:
8
• If the currently-connected network is the same as the pre-configured network that
9
your administrator has set up, the phone will not restart and stay in the Auto mode.
10
• If the currently-connected network is not the same as the pre-configured network
11
that your administrator has set up, the phone will prompt you for permission to
12
restart before connecting to the pre-configured network.
13

Connecting to a Wi-Fi network

14
About this task
15
Use this procedure if your phone is not configured to connect to a specific Wi-Fi network.
16
Before you begin
17
• Ensure that the system administrator gave you access to perform this task.
18
• Select Wi-Fi as your network mode.
19
• When you set the network mode, note the SSID, as this is the name of the Wi-Fi network that
20
the phone will attempt to connect to.
21
• Depending on the type of security in the Wi-Fi network, obtain the required credentials.
22
Contact your system administrator for more details.
23
Procedure
24
1. Press Main Menu.
25
2. Scroll to Settings and press Select.
26
3. Scroll to Network and press Select.
27
4. To access the list of available Wi-Fi networks, scroll to Wi-Fi network and press Select.
28
5. Scroll to the required Wi-Fi network and press Connect to start the connection process.
29
6. To restart the phone, press OK.
30
7. If the security is WEP or WPA/WPA2 PSK, in Password, enter the password for the Wi-Fi
31
network.
32
October 2022
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Using Avaya J189 SIP IP Phone in Avaya Aura
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)
Setting the network mode
®
27