4-4 Cabling specifications
Table 1 Cabling for the IPEC and MPDC (Sheet 2 of 2)
Cable Designation
-48 V dc (B)
BR
BR
Alarm cable requirements
Cabling of the Extended System Monitor (XSM, NT8D22) when two or more
IPECs are configured together is described and illustrated in this subsection.
The XSM is located inside the rear of each IPEC pedestal (see figure "Location
of the Extended System Monitor (XSM)" on page 4-4).
Figure 3 Location of the Extended System Monitor (XSM)
One XSM, usually in the first IPEC, is designated as the master system
monitor. All other XSMs located in the remaining columns are designated as
slave system monitors. DIP switches (also called option switches) are set in
the XSM to establish the master/slave relationship.
555-4001-129 Standard 08.01 November 2000
IPEC
Position
YY
(A)
YY
(B)
YY
J5
J3
NT7D67
BL0 CB0 CB1
Pedestal base (rear view with grill removed)
MPDC Connection
Fuse (NEXT or LAST) on B fuse panel
Position (NEXT or LAST) on row A of
BRTN plate
Position (NEXT or LAST) on row B of
BRTN plate
Extended System Monitor
J6
J4
CAUTION
NT7D10
CB2 CB3