Pm107; Pm116; Pm117; Pm128 - Nortel Meridian SuperNode SL-100 Reference Manual

The following is an example report format:
PM106 mmmdd hh:mm:ss ssdd RTS pmid
Node :InSv From <previous IPE state>
<optional text>
The value of the optional text field indicates the reason for the ISTb state.
The following is an example report:
PM106 FEB01 21:50:00 2200 RTS IPE HOST 00 3
Node : InSv
PM106 AUG18 08:04:56 3406 RTS
Node : InSv

PM107

Log PM107 is generated when the IPE makes a transition from the InSv, SysB
or ManB state to the CBsy state.
The following is an example report format:
PM107 JAN18 15:14:26 4405 CBSY IPE HOST 00 3
Node:CBsy

PM116

Log PM116 is generated when a message is sent from the IPE to the CC
indicating that a message error has been detected.
The following is an example report format:
PM116 FEB28 13:55:55 3442 INFO PP-REPORT-DUMP IPE HOST 00 3
hhhh
hhhh

PM117

Log PM117 is generated when there is trouble at the IPE. The reason for the
trouble is described in the log text.
The following is an example report format:
PM117 JAN18 17:20:48 1097 TBL IPE HOST 00 3
VALUE:0.

PM128

Log PM128 is generated when the IPE makes a transition from the InSv state
to the ISTb state.
Meridian SuperNode MSL-100 Intelligent Peripheral Equipment (IPE) Reference Manual MSL14
From ISTb
ISTb Cleared (Load File Mismatch)
From ISTb
ISTb Cleared (XPEC Type Mismatch)
From InSv
hhhh hhhh hhhh
hhhh hhhh hhhh
REASON:No response
IPE IPE0 00 0
hhhh hhhh hhhh
hhhh hhhh hhhh
FROM PP
Log and fault reports 7-5
hhhh hhhh
hhhh hhhh