Nortel Meridian SuperNode SL-100 Reference Manual page 118

Table 7-2 7-PM189 field descriptions (Sheet 2 of 2)
Text value
Flash memory failure
User connection accepted/rejected
The following is an example log report:
RMSLDSNXAY
Information Report
RMSLDSNXAY
Information Report
RMSLDSNXAY
Information Report
RMSLDSNX10BB
Information Report
RMSLDSNX10BB
Information Report
RMSLDSNX10BB
Information Report
RMSLDSNX10BB
Information Report
18:54:50 6072 INFO PM SW
Information Report
RMSLDSNX10BB
Information Report
Meridian SuperNode MSL-100 Intelligent Peripheral Equipment (IPE) Reference Manual MSL14
PM189 AUG05 15:48:10 7200 INFO PM SW
IPE IPE2 02 0
User connection accepted.
From IP Address: 47.32.128.173
PM189 AUG05 15:48:10 7200 INFO PM SW
IPE IPE2 02 0
User connection rejected.
From IP Address: 47.32.128.173
PM189 AUG05 15:46:51 6600 INFO PM SW
IPE IPE2 02 0
User is disconnecting.
From IP Address: 47.32.128.128
PM189 JAN27 18:54:50 6072 INFO PM SW
IPE IPE2 02 0
Flash Boot Load Update
PM189 JAN27 18:54:50 6072 INFO PM SW
IPE IPE2 02 0
Flash Boot Load Update Failure
PM189 JAN27 18:54:50 6072 INFO PM SW
IPE IPE2 02 0
Corrupt load transferred
PM189 JAN27 18:54:50 6072 INFO PM SW
IPE IPE2 02 0
Memory not initializedRMSLDSNX10BB
IPE IPE2 02 0
DRAM Write Failure (Out of Heap)
PM189 JAN27 18:54:50 6072 INFO PM SW
IPE IPE2 02 0
SRAM Out of Memory Failure
Log and fault reports 7-9
Event description
This log will be generated when an error
is detected in programming a software
load into Flash memory during a Switch
Manager directed software upgrade.
This log will be generated whenever the
Switch Manager attempts to establish a
connection to the IPE or disconnect
from the IPE through its Ethernet port.
PM189 JAN27