Input Prompt (>); Commands And Fixed Parameters; Variables; Responses - Nortel Meridian SuperNode SL-100 Reference Manual

Input prompt (>)
An input prompt (>) indicates that the information that follows is a command:
>BSY
Commands and fixed parameters
Commands and fixed parameters that are entered at a MAP terminal are shown
in uppercase letters:
>BSY CTRL

Variables

Variables are shown in lowercase letters:
>BSY CTRL
The letters or numbers that the variable represents must be entered. Each
variable is explained in a list that follows the command string.

Responses

Responses correspond to the MAP display and are shown in a different type:
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.
The following excerpt from a procedure shows the command syntax used in
this document:
Procedure 1
At your location
1 Manually busy the CTRL on the inactive plane by typing
>BSY
and pressing the Enter key.
where
ctrl_no is the number of the CTRL (0 or 1)
Example of a MAP response :
FP 3 Busy CTRL 0: Command request has been submitted.
FP 3 Busy CTRL 0: Command passed.
Meridian SuperNode MSL-100 Intelligent Peripheral Equipment (IPE) Reference Manual MSL14
ctrl_no
CTRL ctrl_no
About this document xv