Xsm103; Xsm104 - Nortel Meridian SuperNode SL-100 Reference Manual

The following is an example report format:
XSM102 mmmdd hh:mm:ss nnnn INFO XSM_DATA_REPORT
<Report text here>
DATALINK = <sllnk device name>
The following is an example log report:
XSM102 JAN23 18:02:25 1236 INFO XSM_DATA_REPORT
NO FREE QUEUE. ONE INCOMING MESSAGE DISCARDED.
DATALINK = XSMLOOP1
If the log appears frequently, notify design support. The loss of one incoming
message is not of great concern. As the messages in the incoming queue are
being processed, the free queue is replenished, thus clearing the condition.
The messages received prior to this condition take precedence over the
discarded message.

XSM103

Log XSM103 is generated when it is determined that an XSM is no longer
reporting. This log belongs to optional subsystem XSMSUB.
The following is an example report format:
XSM103 mmmdd hh:mm:ss nnnn INFO XSM_FAIL_REPORT
<Report text here>
DATALINK = <sllnk device name>
XSMID = <0 to 63>
DATALINK indicates the datalink datafilled in Table SLLNKDEV associated
with the XSM. XSMID indicates the ID associated with the XSM.
The following is an example log report:
XSM103 FEB05 14:15:22 1234 INFO XSM_FAIL_REPORT
No audit response from master XSM
DATALINK = XSMLOOP1
XSMID = 0
Check the status of the XSM and the datalink.

XSM104

Log XSM104 is generated when the CC receives a report that the XSM is now
working properly. This log belongs to optional subsystem XSMSUB.
The following is an example report format:
XSM104 mmmdd hh:mm:ss nnnn INFO XSM_STAT_REPORT
<Report text here>
DATALINK = <sllnk device name>
XSMID = <0 to 63>
Meridian SuperNode MSL-100 Intelligent Peripheral Equipment (IPE) Reference Manual MSL14
Log and fault reports 7-11