Nortel Meridian SuperNode SL-100 Reference Manual page 42

3-2 Provisioning an IPEC
The following table lists the required equipment for an IPE module.
Table 2 Required equipment for an IPE module
Qty
1
2
The following table lists the provisionable equipment for an IPE module and
the line cards used.
Table 3 Provisionable equipment for an IPE module (Sheet 1 of 2)
Qty
555-4001-129 Standard 08.01 Novenber 2000
PEC Description
IPE module assembly:
NT7D07BA enhanced controller card
or controller card
NT7D07AC PE power supply DC
NT6D40AB IPE module DC
NT8D37EC tip and ring cables (16)
NT8D81AA
NT8D92AB controller to I/O cable
NTNX36DR Cable that connects the MCTM, MCTM-I,
MCRM, MCRM-S, MNET, and MLNK to the
IPE.
Note: MCTM, MCRM, MNET, and MLNK
have been manufacture discontinued but are
still supported in the field.
PEC Description
NT8D02 DLC-16 port IVD Digital Line Card
NT8D03 16 port analog line card
NT8D09 MLC-16 port analog (500/2500) with Message
Waiting feature
NT5D11 LTI-24 port analog T-1 interface card
Note: Occupies 2 consecutive slots-cannot
be installed in slot 7 or 15
NT5D51 Meridian Integrated Conference Bridge
(MICBII)
NTQR02AA Meridian HomeOffice II (MHOII Release 2)