Line101 - Nortel Meridian SuperNode SL-100 Reference Manual

• PM116
• PM117
• PM128
• PM179
• PM180
• PM181
• PM189
• XSM100
• XSM101
• XSM102
• XSM103
• XSM104
• XSM105
Note: These logs can be generated for similar events or errors relating to
other peripherals. Within the log text, the peripheral that generated the log
is named. For a general description of these logs, see Commercial Systems
Log Reports Manual or Defense Switched Network Log Reports Manual.

LINE101

Log report LINE101 is generated when a diagnostic test of line equipment
fails. The test is performed when a manual request was made from the line test
position (LTP) Maintenance and Administration Position (MAP) level, or
when a system request was made in response to encountered trouble. A system
initiated diagnostic test is preceded by a report with event type trouble (TBL),
fault (FLT), or information (INFO).
The following is an example log report format:
LINE101 APR01 12:00:21 2112 FAIL LN_DIAG
LEN len DN dn
DIAGNOSTIC RESULT diagtxt
ACTION REQUIRED acttxt
CARD TYPE pec
The CARD TYPE appearing in the LINE101 log report includes the card PECs
NT8D02AA, NT8D02AB, NT8D02CC, NT8D02EA, NT8D03AB,
NT8D09AD, and NT8D09AJ. An example LINE101 log is shown below.
LINE101 APR01 12:00:21 2112 FAIL LN_DIAG
LEN HOST 03 0 14 24
DIAGNOSTIC RESULT No Response from LTC
ACTION REQUIRED Chk periphls
Meridian SuperNode MSL-100 Intelligent Peripheral Equipment (IPE) Reference Manual MSL14
DN 7811999
Log and fault reports 7-3