Pm179 - Nortel Meridian SuperNode SL-100 Reference Manual

7-6 Log and fault reports
The following is an example report format:
PM128 mmmdd hh:mm:ss ssdd TBL ISTB pmid
Node : ISTb <reason text> From Insv
Unit 0 : ISTb <trouble info>
Unit 1 : InSvUnit0: MTCARB is <state>,
Unit1: MTCARB is <state>
The reason for the transition can be derived from the following table:
Table 7-1 7-PM128 field descriptions
Text value
Unit ISTb <reason text>
Unit ISTb
From InSv
<reason text> From SysB
The following is an example report:
PM128 JAN17 14:11:31 3300 ISTB IPE HOST 00 3
PM128 AUG18 08:25:18 0975 TBL
PM128 AUG18 08:25:18 0975 TBL

PM179

Log PM179 is generated when a message is sent from the IPE to the CC
indicating a hardware exception has been detected.
The following is an example report format:
PM179 MAR12 15:40:27 0078 TBL PM HW EXCEPTION REPORT IPE HOST
00 3
Exception ID:02
Status Register:2009 Program Counter: 00E00876
Special Status Register:
555-4001-129 Standard 08.01 November 2000
Node:ISTb (CSlink OOS)
ISTb Cleared (Load File Mismatch)
IPE IPE0 00 0
Node : ISTb (XPEC Type Mismatch) From InSv
IPE IPE0 00 0
Node : ISTb (IP Port Info Mismatch) From InSv
Text: Bus Error
Event description
Indicates that a unit is in-sevice trouble
because of reason indicated by
<reason text>.
Indicates that a unit has changed to the
in-service trouble state.
Indicates that a unit has gone from
in-service.
Indicates that the previous state of the
node was sytsem-busy because of
reason indicated by <reason text>.
ISTB
ISTB
0110