Adjustment Of Fu-Controller (If Kongsberg Delivery) - Kongsberg Frydenbo IRV-2 Maintenance Manual

Maintenance Manual
Start the pumps from the main control panel.
Push the corresponding "IN COMMAND"
button [1] to engage the follow-up controller.
Operate the controller to mid-ship command
and make sure that the rudder position to
mid-ship position is correctly aligned. If it is
misaligned loosen the clamp screw [2] adjust
the 0-point and turn the potentiometer [3]
until rudder mid-ship position is correctly
aligned.
Operate the selector controller to 30 degrees port or starboard direction.
Make sure that the rudder position is correctly aligned. If not, adjust the potentiometer.
Tighten the clamp screw [2].
3
KONGSBERG PROPRIETARY. This document and its accompanying elements contain KONGSBERG
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited if not
otherwise explicitly agreed with KONGSBERG in writing. Any authorized reproduction, in whole or in part, must
include this legend. ©2022 KONGSBERG - All rights reserved.

Adjustment of FU-Controller (if KONGSBERG delivery)

1
2
P a g e 54 |
73