Table of Contents
Advertisement
Maintenance Manual
11.
Maintenance Instructions
Please see the maintenance support procedure and guidelines described below required for
maintaining the Steering Gear system in a safe and correct manner.
WARNING
▪
▪
▪
•
Most chemicals intended for the product (engine and gearbox oils, glycol, gasoline
and diesel), or the workshop (degreasing agent, paints and solvents) can be harmful
to your health. Read the instructions on packaging carefully! Always follow
protective measures such as using a protective mask, goggles, gloves etc. Ensure
that other personnel are not unknowingly exposed to harmful substances in the air
that they breathe; ensure adequate ventilation. Dispose used and excess chemicals
according to instructions.
•
Ensure that the warning or information labels on the product are always visible.
Replace labels that are damaged or painted over.
•
Take care of the hydraulic oil when replacing parts in the hydraulic system. Any oil
spillage, even a small one, will cause environmental damage. Used filter elements
and worn out hydraulic oil should be disposed safely
•
To avoid unexpected stops, the importance to maintain the equipment on a regular
basis is emphasized.
•
Use spare parts supplied by Kongsberg Maritime. Use of other than Kongsberg
Maritime approved spare parts will void the warranty and may result in system
failure or reduced lifetime.
•
For scheduled class survey, general overhaul or repair it is advised to use Kongsberg
Maritime service engineers. This will limit the time of repair to a minimum and
ensure continuous safe operation.
•
It is requested that any failures or maintenance work on the equipment shall be
reported to Kongsberg Maritime dep. Steering Gear - Hagavik. By reporting failures
and maintenance work, an accurate equipment history can be maintained by
Kongsberg Maritime. This history will be continuously monitored and compared to
other vessels with similar equipment. With this information, KONGSBERG can
provide better service, faster delivery of spare parts, and guidance for preventive
maintenance.
KONGSBERG PROPRIETARY. This document and its accompanying elements contain KONGSBERG
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited if not
otherwise explicitly agreed with KONGSBERG in writing. Any authorized reproduction, in whole or in part, must
include this legend. ©2022 KONGSBERG - All rights reserved.
Never work alone when installing heavy components, even when using secure
lifting equipment such as lockable block and tackle. Most lifting devices require
two people, one to oversee to the lifting device and the other to ensure that the
components do not get caught and damaged.
Always wear protective goggles if there is a risk of splinters, grinding sparks and
splashes from acid or other chemicals. Eyes are extremely sensitive and an injury
to them can result in loss of sight.
Using hydraulic oil other than the one specified in this manual may cause
malfunctions when operating the equipment. This may cause personal injury and
equipment damage
Note!
P a g e
25 |
73
Advertisement
Chapters
Table of Contents
