Table of Contents
Advertisement
Maintenance Manual
1.
Turn the selector switch on the motor controller to position
2 "STOP".
2.
Disconnect the electrical cables in the outlet box.
3.
Loosen the bolts [1] and remove the electric motor.
4.
Replace the flexible coupling [2].
5.
Align the couplings and lower the motor vertically on to the
bell house.
6.
Fasten the bolts [1].
7.
Turn the selector switch on the motor controller to position 1 "REMOTE CONTROL".
KONGSBERG PROPRIETARY. This document and its accompanying elements contain KONGSBERG
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited if not
otherwise explicitly agreed with KONGSBERG in writing. Any authorized reproduction, in whole or in part, must
include this legend. ©2022 KONGSBERG - All rights reserved.
Replacement of Flexible Coupling in Pump Unit
P a g e
33 |
73
Advertisement
Chapters
Table of Contents
