Table of Contents
Advertisement
Faceplate & Door Frame Overlay Installation
MESH SCREEN / INNER DOOR FRAME REMOVAL/INSTALLATION
1. The inner door frame (1) and mesh screen (2) come attached to the
unit. Remove the inner door frame (held by magnets) and screen by
pulling the bottom of the frame forward and lifting up.
1
Part 3 is ordered separately and is
available in a choice of two fi nishes,
therefore packaged as an acces-
sory. It is a required component.
2. Remove screws from inner side of the inner door frame and discard
screws and brackets. (Brackets not shown). Remove the screen mesh
from inner door frame.
Screw Locations
3. Pull the bottom of the inner door frame forward, lift up and remove frame
Mesh screen from inner door frame (1) to be removed and installed into
outer door frame (3) as shown. Bend the six tabs down to secure the mesh
to the outer door frame.
3
919-387
Part 1 & 2 are packaged with the unit
2
3
1
Tabs
2
4. Hook the outer door frame (3) and mesh screen assembly (2) over
the inner door frame (1).
3
2
5. Bend the center tab up and secure with a screw to attach the outer
frame/mesh assembly to the inner door frame
5. Attach the completed assembly to the glass frame on the unit.
6. Proceed to Faceplate installation.
1
Regency Horizon ® HZ54E-11 Gas Fireplace
installation
HZ54E
1
12.15.14
51
|
Advertisement
Table of Contents
