20.1
Querying system information
The following system information can be queried:
Centrifuge model
The maximum speeds of the various rotor codes,
Centrifuge program version
Frequency converter type
Frequency converter program version
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
Press and hold the button for eight
seconds.
Press the key.
Press the key.
START
PULSE
Centrifuge model.
Press the key.
R : Rotor code of the rotor.
: The rotor code of the currently used
rotor is marked with an asterisk.
RPMmax : The maximum speed of the
rotor permitted for this centrifuge.
The maximum speeds of the various rotor
codes can be displayed with the keys.
Press the key.
Centrifuge program version.
Press the key.
Frequency converter type.
Press the key.
Frequency converter program version.
Press the key twice to exit the "
STOP
OPEN
menu or press three times to exit the "
MACHINE MENU ".
AB1101EN_SA
STOP
OPEN
key.
PROG
RPM
PROG
RPM
PROG
RPM
Example:
PROG
RPM
Example:
PROG
RPM
Example:
PROG
RPM
Example:
PROG
RPM
Example:
PROG
RPM
Info"
PROG
RPM
Rev. 01 / 11.2022
t/min:s
t/min:s
t/min:s
PROG
RPM
t/min:s
t/min:s
t/min:s
t/min:s
t/min:s
Example:
t/min:s
PROG
RPM
EN
t/min:s
t/min:s
25/45