Short-Term Centrifugation; Emergency Stop - Hettich EBA 280 Operating Manual

16.3

Short-term centrifugation

 Press the key to activate the RPM display
(RPM) or the RCF display ( RCF ) as
RCF
needed. The LED above the key is
illuminated if the RCF display ( RCF ) is
activated.

 Input the desired centrifugation parameters (see the
"Programming" chapter).

 Press the key and keep it pressed.
START
PULSE
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.

 Release the key again.
START
PULSE
The centrifugation run is ended.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example 7.
17

Emergency Stop

 Press the key twice.
STOP
OPEN
During the Emergency Stop, the run-out
occurs at brake stage 9 (shortest run-out
time). Brake stage
AB1101EN_SA
Example:
RPM display (RPM)
PROG
PROG
PROG
PROG
Example:
RPM display (RPM)
PROG
9 is displayed.
Rev. 01 / 11.2022
Example:
RCF display ( RCF )
RPM t/min:s PROG
RPM t/min:s PROG
RPM t/min:s PROG
RPM t/min:s PROG
Example:
RCF display ( RCF )
RPM t/min:s PROG
EN
RPM t/min:s
RPM t/min:s
RPM t/min:s
RPM t/min:s
RPM t/min:s
21/45