Continuous Run - Hettich EBA 280 Operating Manual

EN
 After the time elapses or if the centrifugation run is
STOP
OPEN
aborted by pressing the
occurs with the set brake stage.
The brake stage is displayed. Example
16.2

Continuous run

 Press the key to activate the RPM display
(RPM) or the RCF display ( RCF ) as
RCF
needed. The LED above the key is
illuminated if the RCF display ( RCF ) is
activated.

 Input the desired centrifugation parameters. Set the
parameters t/min and t/sec to zero (see the
"Programming" chapter).

 Press the key.
START
PULSE
The centrifugation run is started.
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.

 Press the key.
STOP
OPEN The centrifugation run is ended.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example 7
20/45
Example:
RPM display (RPM)
PROG
key, the run-out
7
Example:
RPM display (RPM)
PROG
PROG
PROG
PROG
Rev. 01 / 11.2022
Example:
RCF display ( RCF )
RPM t/min:s PROG
Example:
RCF display ( RCF )
RPM t/min:s PROG
RPM t/min:s PROG
RPM t/min:s PROG
RPM t/min:s PROG
AB1101EN_SA
RPM t/min:s
RPM t/min:s
RPM t/min:s
RPM t/min:s
RPM t/min:s