EN
20.8
Querying the hours of operation and the number of centrifugation runs
The hours of operation are divided into internal and external hours of operation.
Internal hours of operation: Total time the device was switched on.
External hours of operation: Total time of the previous centrifugation runs.
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
Press and hold the button for eight
seconds.
Press the key until the following is
displayed:
Press the key.
START
PULSE
TimeExt : External hours of operation.
Press the key.
TimeInt : Internal hours of operation.
Press the key.
Starts : Number of all centrifugation runs.
Press the key twice to exit the "
STOP
OPEN
Cycles" menu or press three times to exit
the " MACHINE MENU ".
32/45
STOP
OPEN
key.
PROG
RPM
PROG
RPM
Example:
PROG
RPM
Example:
PROG
RPM
Example:
PROG
RPM
Time &
PROG
RPM
Rev. 01 / 11.2022
t/min:s
t/min:s
t/min:s
t/min:s
t/min:s
Example:
t/min:s
PROG
RPM
AB1101EN_SA
t/min:s