General Precautions; Ac Power Precautions - Christie CP2415-Xe Installation And Setup Manual

General precautions

Read all safety and warning guidelines before installing or operating the projector.
Warning! If not avoided, the following could result in death or serious injury.
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
• Install the product so users and the audience cannot enter the restricted area at eye level.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• High leakage current present when connected to IT power systems.
• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
• Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
• UV EXPOSURE! For protection from harmful radiation, keep all product housings intact during
operation.
• Protective safety gear and goggles are recommended when servicing.

AC power precautions

Read all safety and warning guidelines before connecting to AC power.
If you cannot insert the plug into the existing outlet, contact an electrician to have the outlet replaced.
CP2415-Xe Installation and Setup Guide
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
6