Item
Line frequency
Projector components
Learn about the projector components.
ID
Component
A
Top cover
B
Air intake
C
Communications panel
D
Adjustable feet (x4)
E
Air filter cover and air
filter
F
Projection lens
G
Service access door
H
Power cord and AC
receptacle
I
Rear cover
J
Tail light board
Preparing the installation site
Ensure the installation area is ready for the components.
1. Clear the installation area.
2. Place each component near its installation location.
CP2415-Xe Installation and Setup Guide
020-103584-02 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
50/60 Hz
Description
Provides access to components in the projector.
Provides cool air to the projector.
Provides access to Input connections.
Adjust the tilt of the projector.
Provides access to the air filter, which removes particles from the intake air
before it circulates in the front compartment to cool the main electronics.
A variety of lenses can be used with this cinema projector.
The service access door provides access to components in the projector.
Provides power to the projector.
Provides access to internal components of the projector.
Provides information about the status of the projector.
Installation and setup
17