Extron electronics AXP 64 C AT User Manual page 30

Exit Live Mode and Enter Emulate Mode
Click the Emulate button in the DSP Configurator menu bar.
1.
Alternatively, select Tools > Disconnect from Device or press <F6> on the keyboard.
2. Click OK to confirm.
Emulate Mode
While in Emulate mode, DSP Configurator is functioning in an "offline" state. Changes made
to the configuration file are not applied to a AXP 64 C AT.
In Emulate mode, the user can create and configure the software as though a device was
connected, except for any actions that require direct connection to the device or information
that is stored only on the device. Once configuration is complete, the user can switch to
mode and apply the configuration to the device or save the configuration file to be
Live
loaded onto one or multiple devices at a later time.
Creating configuration files in Emulate mode saves time by not requiring a device to be
connected or present in order for the bulk of DSP configuration to be completed.
NOTE: Not all menu options or actions are available in Emulate mode.
AXP 64 C AT • DSP Configurator Configuration 22