Renaming A Receiver Or Transmitter - Extron electronics AXP 64 C AT User Manual

Renaming a Receiver or Transmitter

In addition to renaming devices, individual receiver and transmitter channels can be
renamed in Dante Controller. To better organize the various receivers and transmitters,
it is recommended each receiver and each transmitter be named using a description of
the device they belong to, the location of the device, or the purpose of the receiver or
transmitter.
ATTENTION:
It is essential that a Dante device be named before audio subscriptions with
•
other devices are established. Existing subscriptions are removed when a device
is renamed.
Il est essentiel qu'un appareil Dante soit nommé avant l'établissement des
•
abonnements audio avec d'autres appareils. Les abonnements existants sont
supprimés lorsqu'un appareil est renommé.
To view the receiver or transmitter channels in Dante Controller, click the
receiver or transmitter device name to expand it. The
device is expanded (see figure 22,
Figure 22.
TIP:
receiver and transmitter channels to better indicate the source at the transmitters or
receivers.
).
1
Expanded Device View — Input and Output Names
To simplify setup and operation of large AXP 64 C AT systems, rename the
AXP 64 C AT • Dante Configuration and Operation
+
sign next to the
+
sign becomes a – sign when the
27