Software Installation; Software Installation Overview - Extron electronics AXP 64 C AT User Manual

Software Installation

To configure and operate the AXP, use a PC running Microsoft Windows 10 or newer and
the following software programs:
•
•
To assist identification of multiple connected AXP 64 C ATs on the network, rename each
device using Dante Controller (see
page 25). After the AXP is renamed, connect to DSP Configurator to configure it (see
Connecting to DSP Configurator
Both DSP Configurator and Dante Controller are available from the AXP 64 C AT product
page on the
from Audinate.
See
AXP 64 C AT to a Network
ports.

Software Installation Overview

Both DSP Configurator and Dante Controller must be installed to configure the AXP 64 C AT
and route transmit and receive channels. Download and install both software programs in
the order they are listed below:
Download Dante Controller for Windows from
and Installing Dante Controller
1.
2.
3.
4.
Dante Controller for Windows from Audinate is required to select and route
AXP 64 C AT digital inputs and outputs to and from all connected Dante-compatible
devices on the same network and to rename connected devices.
DSP Configurator is used to customize signal processing for the input channels of the
AXP 64 C AT.
Extron Website. Digital signal routing must be done using Dante Controller
Rear Panel Features and Cabling
on page 11 for additional details to connect via the LAN
Install Dante Controller.
Rename each AXP C AT as it is placed on the network (when there are multiple
AXP 64 C ATs on the network) (see
on page 25).
NOTES:
• To avoid confusion, rename each device with a unique identifier.
• To simplify renaming, connect only one device to the network at a time. As
each device is renamed, it can remain on the network.
Download DSP Configurator (see
on page 14).
Install DSP Configurator (see
Renaming the AXP 64 C AT in Dante Controller
on page 16).
on page 7, and Connecting the
www.extron.com
on page 23).
Renaming the AXP 64 C AT in Dante Controller
Downloading DSP Configurator and Software
Connecting to DSP Configurator
AXP 64 C AT • Installation
on
(see Downloading
on page 16).
13