Introduction; About This Guide; About The Axp 64 C At - Extron electronics AXP 64 C AT User Manual

Introduction

This section provides an overview of this guide and the features of the Extron AXP 64 C AT
Audio Expansion Processor. Topics include:
•
•
•
•

About this Guide

This guide contains installation, configuration, and operation information for the Extron
AXP 64 C AT Audio Expansion Processor. In this guide, the terms "AXP," "AXP 64,"
"AXP 64 C AT," and "processor" are used interchangeably to refer to the AXP 64 C AT.
About the AXP 64 C AT
The Extron AXP 64 C AT is an audio expansion processor with six mic/line inputs and
four line outputs for remote connectivity to a Dante™-enabled DMP 128 audio system.
It is used to place six mic/line sources onto a Dante audio network, and route any four
Dante channels from the network to analog output for connection to an amplifier or other
destination. The AXP 64 C AT features Extron ProDSP with gain, filtering, and dynamics
processing for all inputs and outputs. Four of the inputs also include Acoustic Echo
Cancellation (AEC), 48 volt phantom power for each, and dedicated control ports for mic
control.
In addition, inputs 1 through 4 are FlexInput capable, allowing you to route a Dante channel
in place of a local mic/line input. A single Ethernet cable to a central equipment rack can
link multiple AXP 64 C AT units, avoiding the need to pull one cable for each mic/line input.
The DSP Configurator Software, downloadable free of charge from www.extron.com,
enables setup of DSP parameters and AEC.
The compact 1U high, half rack wide, 9.5-inch (24.1 cm) deep enclosure can be placed on
furniture near table microphones and line level sources. It can also be mounted to a rack or
under furniture. For information on mounting options and UL rack mounting guidelines see
Mounting the AXP 64 C AT
About this Guide
About the AXP 64 C AT
Features
AXP 64 C AT Application Diagrams
on page 43.
AXP 64 C AT • Introduction 1