Omron CompoNet MX2 Series User Manual page 53

2
Cut out the two plastic break-outs from the
front cover.
Make sure no sharp edges remain.
3
Reinstall the front cover and tighten the
screws.
4
Connect the connector of inverter connection
PCB of CompoNet Communications Unit to the
connector of inverter.
Method:
First align the small hole (B) on the inverter con-
nection PCB with the guide-post (D) in the inverter.
Then, align the larger hole on the inverter connec-
tion PCB (C) with the threaded hole (F) in the
inverter.
Push the inverter connector into place.
CompoNet Communications Unit User's Manual (I582-E1)
2 CompoNet Communications Unit Mounting and Wiring
C
A
B
F
E
D
2
2 - 11