Omron CompoNet MX2 Series User Manual page 56

2 CompoNet Communications Unit Mounting and Wiring
10
Install the Digital Operator on the upper portion of
the CompoNet Communications Unit.
• Keep the spacer cover you removed in a safe place.
If You Use the LCD Digital Operator
11
Connect the Digital Operator via a straight Ethernet
cable to the RJ45 connector in the inverter.
12
Set the required inverter parameters.
Additional Information
Please refer to Section 3 Network Startup on page 3-1 and Section 4 Remote I/O on page 4-1.
2 - 14
CompoNet Communications Unit User's Manual (I582-E1)