Assembly Replacement Sequence
The following steps show the sequence to replace an assembly in the network
analyzer.
1. Identify the faulty group. Refer to Chapter 4, "Start Troubleshooting Here."
Follow up with the
faulty assembly.
2. Order a replacement assembly. Refer to Chapter 13, "Replaceable Parts."
3. Replace the faulty assembly and determine what adjustments are necessary.
Refer to Chapter 14, "Assembly Replacement and Post-Repair Procedures. n
4. Perform the necessary adjustments. Refer to Chapter 3, "Adjustments and
Correction Constants. '
5. Perform the necessary performance tests. Refer to Chapter 2,
Verification and Performance Tests. n
Digital Control Troubleshooting
that identifies the
"System